Product
Help
Pricing
About
Jobs
Log in
Get started
Author
Add to collection
Lei Sun
Observed names:
Lei SUN,
Sun Lei
Institutions:
Civil Aviation University of China,
Shanxi Vocational University of Engineering Science and Technology,
Luoyang Ship Material Research Institute
Observed institutions:
Civil Aviation University of China,
Nuclear Power Institute of China,
Shanxi Vocational University of Engineering Science and Technology,
Luoyang Ship Material Research Institute,
Beihang University
ORCID:
0000-0001-7023-5444
Observed ORCID:
0000-0001-7023-5444
OpenAlex ID:
A5102323548
FV-MP model to predict lean blowout limits for multi-point lean direct injection combustors
2019
·
Lei Sun
, Yong Huang
, et al.
·
Aerospace Science and Technology
·
30
Studies on air core size in a simplex pressure-swirl atomizer
2017
·
Zhilin Liu
, Yong Huang
, et al.
·
International Journal of Hydrogen Energy
·
30
Semi-empirical model for the engine liquid fuel sheet formed by the oblique jet impinging onto a plate
2018
·
Ruixiang Wang
, Yong Huang
, et al.
·
Fuel
·
25
Hybrid method based on flame volume concept for lean blowout limits prediction of aero engine combustors
2021
·
Lei SUN
, Yong HUANG
, et al.
·
Chinese Journal of Aeronautics
·
16
PDF
An Overview of Methodologies to Predict Lean Blowout Limits for Gas Turbine Combustors
2019
·
Sun Lei
, Huang Yong
·
International Bhurban Conference on Applied Sciences and Technology (IBCAST)
·
12
Microstructure Evolution and Mechanical Properties of Ferrite–Austenite Stainless Steel Bimetals Fabricated via Wire Arc Additive Manufacturing
2023
·
Xinghua Wang
, Yanming Wu
, et al.
·
steel research international
·
10
Effects of the Recess Length of the Pilot Stage on the Lean Blowout Limits for the Multipoint Lean Direct Injection Combustors
2019
·
Lei Sun
, Yong Huang
, et al.
·
International Journal of Turbo and Jet Engines
·
7
Improved Semi-emipirical Prediction of Viscous Spray Cone Angle for Pressure Swirl Atomizers
2017
·
Lei Sun
, Yong Huang
, et al.
·
Atomization and Sprays
·
7
A study of pyrolysis reaction mechanisms for two different sustainable aviation fuels certificated by Civil Aviation Administration of China
2025
·
Lei Sun
, Fangliang Wang
, et al.
·
Journal of Analytical and Applied Pyrolysis
·
5
Investigation of effect of atomization performance on lean blowout limit for gas turbine combustors by comparison of utilizing aviation kerosene and methane as fuel
2021
·
Lei Sun
, Yong Huang
, et al.
·
International Journal of Turbo and Jet Engines
·
5
Critical droplet diameter for flame stabilization in aero-engine shear layers: a reduced energy–mass balance model
2025
·
Fangliang Wang
, Lei Sun
, et al.
·
International Communications in Heat and Mass Transfer
·
4
Influence of Atomization Characteristics on Lean Blow-Out Limits in a Gas Turbine Combustor
2021
·
Xiwei Wang
, Yong Huang
, et al.
·
ASME Turbo Expo: Turbomachinery Technical Conference and Exposition (GT)
·
4
Theoretical analysis for the centrifugal effect on premixed flame speed in a closed tube
2017
·
Lei Sun
, Yong Huang
, et al.
·
International Journal of Hydrogen Energy
·
4
Study on Fatigue Performance of Pulsed Tungsten Inert Gas Welding Joint of Duplex Stainless Steel Thin Tube
2023
·
Chaofei Yang
, Wenjian Zheng
, et al.
·
Materials
·
3
PDF
Effects of Key Parameters on Viscous Hollow Cone Spray Angle and Available Correlation for Spray Angle Prediction
2022
·
Lei Sun
, Yong Huang
, et al.
·
Atomization and Sprays
·
3
Analysis of pressure-temperature limit curve for reactor pressure vessel and its influence factors
2025
·
Juan Luo
, Xiangji Zhao
, et al.
·
Journal of Physics Conference Series
·
2
PDF
Hybrid Method Based on FV Concept for Lean Blowout Limits Predictions for Aero Engine Combustors With Low Inlet Temperature
2020
·
Sun Lei
, Huang Yong
, et al.
·
ASME Turbo Expo: Turbomachinery Technical Conference and Exposition (GT)
·
2
Lean blowout performance and flame dynamic characteristics of combustors using sustainable aviation fuels
2026
·
Lei Sun
, Fangliang Wang
, et al.
·
Aerospace Science and Technology
·
1
Study of Ignition Process in an Aero Engine Combustor Based on Droplet Evaporation Characteristics Analyses
2025
·
Lei Sun
, Rui Feng
, et al.
·
Energies
·
1
PDF
Excellent transpiration cooling performance of oriented porous structures for hypersonic vehicle leading edge
2026
·
Bo Zhang
, Haochuan Sun
, et al.
·
International Communications in Heat and Mass Transfer
Analysis of microstructure evolution and mechanical properties of heat-affected zone in laser welding of 10Ni5CrMoV steel
2026
·
Baowei ZHANG
, Lei SUN
, et al.
·
DOAJ (DOAJ: Directory of Open Access Journals)
Research on the mechanism of liquid film rim caused by the jet impact
2021
·
Ruixiang Wang
, Sun Lei
, et al.
·
International Conference on Liquid Atomization and Spray Systems (ICLASS)
PDF
Investigation on the Fluctuations of the Spray Angle Generated From Pressure-Swirl Atomizers
2020
·
Xiwei Wang
, Yong Huang
, et al.
·
ASME Turbo Expo: Turbomachinery Technical Conference and Exposition (GT)
Pulsation in Bag Breakup of Round Liquid Jets in Crossflow
2014
·
Pei Feng Liu
, Yong Huang
, et al.
·
Advanced materials research
Show more works
View as search
Works count:
25
Citation count:
171
H-index:
7
I10-index:
6
Year
Topic
Type