Author

Zerun Zhu

Observed names: Zerun ZHU, Zhu Zerun, Zhu, Zerun

Institutions: Nanjing University of Science and Technology, Wuhan Digital Design and Manufacturing Innovation Center Co., Ltd. (China), Huazhong University of Science and Technology, Wuhan Institute of Technology, Baidu (China)

Observed institutions: Nanjing University of Science and Technology, State Key Laboratory of Digital Manufacturing Equipment and Technology, Wuhan Digital Design and Manufacturing Innovation Center Co., Ltd. (China), Huazhong University of Science and Technology, Wuhan Institute of Technology, Baidu (China)

OpenAlex ID: A5102345692

High precision and efficiency robotic milling of complex parts: Challenges, approaches and trends

2021 · Zerun ZHU, Xiaowei TANG, et al. · Chinese Journal of Aeronautics · 211

PDF

Stiffness performance index based posture and feed orientation optimization in robotic milling process

2018 · Chen Chen, Fangyu Peng, et al. · Robotics and Computer-Integrated Manufacturing · 178

Parametric chip thickness model based cutting forces estimation considering cutter runout of five-axis general end milling

2015 · Zerun Zhu, Rong Yan, et al. · International Journal of Machine Tools and Manufacture · 87

Specific cutting energy index (SCEI)-based process signature for high-performance milling of hardened steel

2019 · Zerun Zhu, Fangyu Peng, et al. · The International Journal of Advanced Manufacturing Technology · 47

Estimation of Cutter Deflection Based on Study of Cutting Force and Static Flexibility

2015 · Xianyin Duan, Fangyu Peng, et al. · Journal of Manufacturing Science and Engineering · 33

Nonlinear process damping identification using finite amplitude stability and the influence analysis on five-axis milling stability

2020 · Xiaowei Tang, Fangyu Peng, et al. · International Journal of Mechanical Sciences · 29

Identification of joint position-dependent stiffness parameters and analysis of robot milling deformation

2021 · Zhu Zerun, Chen Chen, et al. · The International Journal of Advanced Manufacturing Technology · 26

High efficiency simulation of five-axis cutting force based on the symbolically solvable cutting contact boundary model

2017 · Zerun Zhu, Fangyu Peng, et al. · The International Journal of Advanced Manufacturing Technology · 26

Stability Prediction Based Effect Analysis of Tool Orientation on Machining Efficiency for Five-Axis Bull-Nose End Milling

2018 · Xiaowei Tang, Zerun Zhu, et al. · Journal of Manufacturing Science and Engineering · 24

Cutting edge element modeling-based cutter-workpiece engagement determination and cutting force prediction in five-axis milling

2019 · Xianyin Duan, Fangyu Peng, et al. · The International Journal of Advanced Manufacturing Technology · 23

Influence mechanism of machining angles on force induced error and their selection in five axis bullnose end milling

2020 · Zerun ZHU, Fangyu PENG, et al. · Chinese Journal of Aeronautics · 22

PDF

Experimental study of the effect of tool orientation on cutter deflection in five-axis filleted end dry milling of ultrahigh-strength steel

2015 · Xianyin Duan, F. Y. Peng, et al. · The International Journal of Advanced Manufacturing Technology · 11

Cutting force prediction considering tool path curvature and torsion based on screw theory

2021 · Zerun Zhu, Jiawei Wu, et al. · The International Journal of Advanced Manufacturing Technology · 7

Configuration optimization through redundancy angle and tool posture by force induced error index in robot ball-end milling

2021 · Zepeng Li, Fangyu Peng, et al. · Procedia CIRP · 6

PDF

A High Efficiency Force Predicting Method of Multi-axis Machining Propeller Blades

2016 · Zerun Zhu, Rong Yan, et al. · Lecture notes in computer science · 5

Cutting force prediction considering force–deflection coupling in five-axis milling with fillet-end cutter

2022 · Xianyin Duan, Lantao Li, et al. · The International Journal of Advanced Manufacturing Technology · 4

PDF

Experimental Study on Cutter Deflection in Multi-axis NC Machining

2014 · Xianyin Duan, Fangyu Peng, et al. · Lecture notes in computer science · 2

Local linearization modeling and coefficients identification of five-axis milling force considering size effect and radial runout

2026 · Zhu Zerun, Zhang Qingzheng, et al. · Mechanical Systems and Signal Processing

Achieving a superplastic elongation above 10,000% in a Pb-Sn alloy

2026 · Zerun Zhu, Wanxu Wang, et al. · Journal of Materials Science

Force‒position coupled dynamic modeling and time-domain solution for robot milling considering dynamic deformation

2026 · Hui Liu, Lin Zhou, et al. · Scientific Reports

PDF

UniCreative: Unifying Long-form Logic and Short-form Sparkle via Reference-Free Reinforcement Learning

2026 · Association for Computational Linguistics 2026, Chong, Meng, et al. · Underline Science Inc.

UniCreative: Unifying Long-form Logic and Short-form Sparkle via Reference-Free Reinforcement Learning

2026 · Wei, Xiaolong, Zhu, Zerun, et al. · arXiv (Cornell University)

PDF

UniCreative: Unifying Long-form Logic and Short-form Sparkle via Reference-Free Reinforcement Learning

2026 · Xiaolong Wei, Zerun Zhu, et al. · Findings of the Association for Computational Linguistics: ACL (Findings of ACL)

PDF

Tool Orientation Planning Based on Kinematic Relation of Five-Axis CNC Machining Tools in Sculptured Surface Machining

2019 · Xianyin Duan, Can Zhang, et al. · IOP Conference Series Materials Science and Engineering

PDF

Experimental Study On Cutter Deflection In Multi-Axis Nc Machining

2014 · Duan, Xianyin, Peng, Fangyu, et al. · Zenodo (CERN European Organization for Nuclear Research)

Works count: 27

Citation count: 741

H-index: 11

I10-index: 12