Author

Sebastian Lam

Observed name: S. Lam

Institutions: Hanbat National University, University of California, Berkeley

Observed institutions: Los Alamos National Laboratory, Hanbat National University, University of California, Berkeley

ORCID: 0000-0002-1670-7372

Observed ORCID: 0000-0002-1670-7372

OpenAlex ID: A5102492162

Dynamic Fracture Processes in Hydrogen Embrittled Iron

2023 · Andrew C. Lee, Abhinav Parakh, et al. · Acta Materialia · 20

Detection of voids in hydrogen embrittled iron using transmission X-ray microscopy

2022 · Andrew C. Lee, Abhinav Parakh, et al. · International Journal of Hydrogen Energy · 20

Direct Observation of Strain-Enhanced Hydrogen Segregation and Failure at High-Angle Grain Boundaries

2024 · Andrew C. Lee, Adam Barsotti, et al. · Acta Materialia · 14

Demonstration of a High-Throughput Tensile Testing Technique Using Femtosecond Laser-Fabricated Tensile Bars in AISI 316 and Additively Manufactured Grade 91 Steel

2021 · Cayla Harvey, Avery J. Torrez, et al. · JOM · 13

Corrosion behavior of a series of combinatorial physical vapor deposition coatings on SiC in a simulated boiling water reactor environment

2022 · Ryan Schoell, Joey Kabel, et al. · Journal of Nuclear Materials · 10

The role of specimen size and grain boundary characteristics in the yield strength of tungsten in microtensile tests

2025 · Tzu-Yi Chang, Sebastian Lam, et al. · Fusion Engineering and Design · 6

Length Scale Effects of Micro- and Meso-Scale Tensile Tests of Unirradiated and Irradiated Zircaloy-4 Cladding

2024 · S. Lam, D. Frazer, et al. · Journal of Nuclear Materials · 6

Experimental Evaluation of Interfacial Bonding Strength Between 304 Stainless Steel Substrate and Electrodeposited Nickel Coating Using Mesoscale Mechanical Testing Methods

2025 · Yuxin Hu, Sebastian Lam, et al. · JOM · 1

The proof of minimal heat impact during femtosecond laser machining of small scale mechanical test samples - example Gallium

2026 · S. Lam, M. Alfreider, et al. · Scripta Materialia

Continuous-Wave Laser Surface Treatment of Cold-Worked 316L: Linking Thermal Cycles to Depth-Resolved Recovery

2026 · Peter Hosemann, Shmuel Samuha, et al. · SSRN Electronic Journal

Small-scale mechanical testing of interfacial toughness in Cr-coated zircaloy-4

2025 · Jiwon Mun, JungHun Park, et al. · Journal of Nuclear Materials

A Novel Machine Learning-Driven Approach to High Throughput Mechanical Testing

2025 · Tongjun Niu, Ross Lee, et al. · JOM

Laser-Induced Microstructural Engineering in Cold-Worked 316L Stainless Steel: A Combined Mechanistic and Modeling Perspective

2025 · Peter Hosemann, Shmuel Samuha, et al. · SSRN Electronic Journal

High throughput tensile testing using femtosecond laser fabrication technique [Slides]

2021 · Avery Torrez, USDOE National Nuclear Security Administration (NNSA), et al. · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information)

Works count: 14

Citation count: 90

H-index: 6

I10-index: 5