Product
Help
Pricing
About
Jobs
Log in
Get started
Author
Add to collection
Luis Pérez
Observed names:
L Pérez,
L. Perez,
L. Pérez,
LUIS PEREZ,
Luis Perez,
Luis PÉREZ
show all 6
Institution:
Universidad Técnica Federico Santa María
Observed institutions:
Universidad de Guanajuato,
Instituto Venezolano de Investigaciones Científicas,
Universidad Técnica Federico Santa María,
Technological Institute of Celaya,
Instituto Politécnico Nacional,
Universidad Técnica Federico Santa María
show all 6
ORCID:
0000-0002-8441-8994
Observed ORCID:
0000-0002-8441-8994
OpenAlex ID:
A5102757083
Simplified fractal FEA model for the estimation of the Young’s modulus of Ti foams obtained by powder metallurgy
2015
·
L. Pérez
, S. Lascano
, et al.
·
Materials & Design
·
26
Bond calibration method for Young’s modulus determination in the discrete element method framework
2017
·
Danilo Estay
, Felipe Chacana
, et al.
·
Granular Matter
·
22
Estimation of elastic moduli of particulate-reinforced composites using finite element and modified Halpin–Tsai models
2015
·
I. Alfonso
, I. A. Figueroa
, et al.
·
Journal of the Brazilian Society of Mechanical Sciences and Engineering
·
20
Optimization of modular structures using Particle Swarm Optimization
2011
·
Orlando Durán
, Luis Pérez
, et al.
·
Expert Systems with Applications
·
20
DEM–FEA estimation of pores arrangement effect on the compressive Young’s modulus for Mg foams
2015
·
L. Pérez
, S. Lascano
, et al.
·
Computational Materials Science
·
17
Structure-function assessment of 3D-printed porous scaffolds by a low-cost/open source fused filament fabrication printer
2021
·
Raúl Vallejos Baier
, José I. Contreras Raggio
, et al.
·
Materials Science and Engineering C
·
15
Solution of the Spare Parts Joint Replenishment Problem with Quantity Discounts Using a Discrete Particle Swarm Optimization Technique
2013
·
Orlando DURÁN
, Luis PÉREZ
·
Studies in Informatics and Control
·
13
Elastic Modulus Estimation for Copper Syntactic Foams Reinforced with Iron Hollow Spheres of Different Wall Thicknesses
2018
·
L. Pérez
, M. Villalobos
, et al.
·
Journal of Materials Engineering and Performance
·
12
Acceleration Analysis of 3-RPS Parallel Manipulators by Means of Screw Theory
2008
·
J. Gallardo
, H. Orozco
, et al.
·
12
Effect of fractal distribution of the porosity on mechanical properties of Al foams manufactured by infiltration
2019
·
J. C. Carranza
, L. Pérez
, et al.
·
Journal of the Brazilian Society of Mechanical Sciences and Engineering
·
10
Development of an RVE using a DEM–FEM scheme under modified approximate periodic boundary condition to estimate the elastic mechanical properties of open foams
2021
·
Mauricio Campillo
, Ramin Sedaghati
, et al.
·
Engineering With Computers
·
9
DEM-FEM combination for modeling and simulation of fractal metallic foams
2022
·
Christian Reyes
, Luis Béjar
, et al.
·
Materials Today Communications
·
8
Mathematical and finite element analysis estimations of the reinforcement effect on Young's modulus of polymer membrane/montmorillonite clay nanocomposites
2021
·
Arlette A. Santiago
, Joel Vargas
, et al.
·
Polymer Composites
·
8
The effect of alumina particles on the microstructural and mechanical properties of copper foams fabricated by space-holder method
2018
·
C Salvo
, C Aguilar
, et al.
·
Materials Research Express
·
8
Percentage porosity computation of three-dimensional non-convex porous geometries using the direct Monte Carlo simulation
2019
·
Mauricio Campillo
, Pablo Pérez
, et al.
·
Engineering With Computers
·
6
Effect of the Al–CNT interlayer on the tensile elastic modulus of Al matrix composites with random dispersion of CNTs
2018
·
L. Pérez
, I. Cabrera
, et al.
·
Journal of the Brazilian Society of Mechanical Sciences and Engineering
·
6
Young's modulus estimation for CNT reinforced metallic foams obtained using different space holder particles
2017
·
L. Pérez
, R. Mercado
, et al.
·
Composite Structures
·
6
Optimization of the Multiechelon System for Repairable Spare Parts Using Swarm Intelligence Combined with a Local Search Strategy
2014
·
Orlando Duran
, Luis Perez
·
Lecture notes in computer science
·
5
Use of the fractal dimension for porosity modification in aluminum foams manufactured using space holder particles
2021
·
Christian Reyes
, Luis Béjar
, et al.
·
Theoretical and Applied Mechanics
·
4
PDF
Production and characterisation of mechanical properties of Ti–Nb–Ta–Mn alloys foams for biomedical applications
2015
·
C. Guerra
, C. Aguilar
, et al.
·
Powder Metallurgy
·
4
Cyclic Behavior of U-Shaped Flexural Plates for Their Implementation in Multidirectional Energy Dissipation Devices
2025
·
Jorge González
, Fernando Barriuso
, et al.
·
Materials
·
3
Solid state transformations from spheres to polyhedrons in hollow Fe spheres
2023
·
Centli Tzentzangari Guerrero Caro
, I. A. Figueroa
, et al.
·
Revista Mexicana de Física
·
2
PDF
Computational analysis as a tool for the study of the porosity system and the mechanical properties of fractal metal foams
2025
·
Luis Perez
, Pablo Perez
, et al.
·
Revista Mexicana de Física
·
1
PDF
Efficiency of particle search methods in smoothed particle hydrodynamics: a comparative study (part I)
2021
·
E. Plaza
, María Castro
, et al.
·
Progress in Computational Fluid Dynamics An International Journal
·
1
Estimation of the Pores Agglomeration Effect on the Compressive Behavior of Metallic Foams: Infiltration and Powder Metallurgy Study Cases
2020
·
JUAN C. CARRANZA
, BERHTA Y. CASAS
, et al.
·
Journal of theoretical and applied mechanics
·
1
PDF
Show more works
View as search
Works count:
31
Citation count:
239
H-index:
10
I10-index:
10
Year
Topic
Type