Get started
Author

Shinichi Nishida

Observed names: S NISHIDA, S Nishida, S. NISHIDA, S. Nishida, SHIN-ICHI NISHIDA, Schinichi Nishida, Shin-Ichi Nishida, Shin-ichi NISHIDA, Shin-ichi Nishida, ShinIchi Nishida, Shinichi NISHIDA, 西田進一
Institution: Gunma University
Observed institutions: Kyushu University, Nippon Steel (Japan), Waseda University, Gunma University, Saga University, University of the Ryukyus
ORCID: 0000-0003-3175-8220
Observed ORCID: 0000-0003-3175-8220
OpenAlex ID: A5102827041
Cementite decomposition in heavily drawn pearlite steel wire
2001 · K Hono, M Ohnuma, et al. · Scripta Materialia · 260
A New Method for Fatigue Life Improvement of Screws
1997 · Shin-ichi Nishida, Chikayuki Urashima, et al. · ESIS publication · 19
Fatigue strength improvement of notched structural steels with work hardening
2007 · Shin-Ichi Nishida, Congling Zhou, et al. · Materials Science and Engineering A · 18
Effects of Chemical Composition of Nonmetallic Inclusions on Fatigue Strength of High Strength Steels
1993 · Yukitaka MURAKAMI, Toshiyuki TORIYAMA, et al. · 鐵と鋼 : 日本鐡鋼協會々誌 · 17
PDF
Estimation of heat transfer coefficient and temperature transition on melt drag process of AZ31 magnesium alloy by heat transfer and solidification analysis
2008 · Shinichi Nishida, Mitsugu Motomura · Journal of Japan Institute of Light Metals · 15
PDF
High-temperature deformation behavior of aluminum alloys produced from centrifugally-atomized powders
1997 · T. Satoh, K. Okimoto, et al. · Journal of Materials Processing Technology · 14
Fatigue Crack Initiation and Propagation Behavior and Fracture Surface of Eutectoid Steels.
1994 · Chikayuki URASHIMA, Shin-ichi NISHIDA · Journal of the Society of Materials Science Japan · 14
PDF
Study on Contact Rolling Fatigue of Rails : 2nd Report, Analysis by High Speed Rail Testing Machine
1985 · Shin-ichi NISHIDA, Kazuo SUGINO, et al. · Bulletin of JSME · 13
PDF
Strip casting of pure magnesium and an AZ31 magnesium alloy by the melt drag process
2005 · Shinichi NISHIDA, Mitsugu MOTOMURA · Journal of Japan Institute of Light Metals · 11
PDF
Mechanical Properties and Frictional Wear Characteristic of Pure Titanium Treated by Atmospheric Oxidation
2021 · Tong Chen, Shinji Koyama, et al. · Materials · 10
PDF
Casting of an Mg Alloy Clad Strip Using a Twin Roll Caster Equipped with a Scraper
2016 · Toshio Haga, Kentaro Okamura, et al. · Materials science forum · 9
Reduction of Surface Cracks at Al-Mg Alloy Strip Surface Cast by Unequal Diameter Twin Roll Caster
2020 · Toshio Haga, Kazuki Yamazaki, et al. · Materials science forum · 8
Casting of High-Aluminum-Content Mg Alloys Strip by a Horizontal Twin-Roll Caster
2013 · Hideto Harada, Shinichi Nishida, et al. · Metallurgical and Materials Transactions B · 8
Effect of Surface Nano-Crystallization on Microstructure and Mechanic Properties of Commercial Pure Titanium
2004 · Ai Ling Wen, R.M. Ren, et al. · Key engineering materials · 8
Procedure in failure analysis
1992 · Shin-ichi Nishida · Elsevier eBooks · 8
Effects of fundamental process factors on the properties of AZ31 magnesium alloy strip produced by the melt drag process
2007 · Shinichi NISHIDA, Mitsugu MOTOMURA · Journal of Japan Institute of Light Metals · 7
PDF
Strip casting of AZ31 magnesium alloy by the melt drag process equipped with a forming belt
2006 · Shinichi NISHIDA, Mitsugu MOTOMURA · Journal of Japan Institute of Light Metals · 7
PDF
Fatigue Properties of Notched Specimens of Ti-6Al-4V Alloy.
1999 · Kazuhisa HAYASHI, Shinichi NISHIDA, et al. · TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A · 7
PDF
Measurement of Fatigue Crack Opening and Closing Points in Thin Plate Specimen and It's Difficulties.
1992 · Chobin MAKABE, Hideo KANESHIRO, et al. · Journal of the Society of Materials Science Japan · 7
PDF
Easy disassembly of steel/aluminum joint by foaming of aluminum part with foaming agent sheet
2024 · Yoshihiko Hangai, Tatsuki Takagi, et al. · The International Journal of Advanced Manufacturing Technology · 6
Influence of Oxidation Processing Temperature on the Structure, Mechanical and Tribological Properties of Titanium Using Carbon Sheets
2021 · Tong Chen, Shinji Koyama, et al. · Metals · 6
PDF
Casting of Al-Mg Strip Using Single Roll Caster Equipped with a Scraper
2021 · Toshio Haga, Kosuke Tsukuda, et al. · Key engineering materials · 6
Prevention of Solidification of Al-40%Sn-1%Cu in Melt Pool on the Roll Casting Using Unequal Diameter Twin Roll Caster
2018 · Toshio Haga, Ryusuke Onishi, et al. · Defect and diffusion forum/Diffusion and defect data, solid state data. Part A, Defect and diffusion forum · 6
Detection of 1 mm Fatigue Crack Initiation Using Strain Waveform
1994 · Chobin Makabe, Hideo Kaneshiro, et al. · Journal of Engineering Materials and Technology · 6
Optimum Producing Conditions of Rapidly Solidified Powder Using Centrifugal Atomization Method.
1993 · Tomio Satoh, Kunio Okimoto, et al. · Journal of the Japan Society of Powder and Powder Metallurgy · 6
PDF
Works count: 377
Citation count: 736
H-index: 10
I10-index: 10
Year
Topic
Type