Get started
Author

K Jagannath

Observed names: Jagannath K, K. Jagannath
ORCID: 0000-0001-8040-5267
Observed ORCID: 0000-0001-8040-5267
OpenAlex ID: A5102862804
Effect of varying 9-Octadecenoic acid (oleic fatty acid) content in biofuel on the performance and emission of a compression ignition engine at varying compression ratio
2017 · P. Dinesha, K. Jagannath, et al. · Biofuels · 10
Metallography & Bulk Hardness of Artificially Aged Al6061-B4C-SiC Stir Cast Hybrid Composites
2016 · Sathya Shankar Sharma, K. Jagannath, et al. · Materials science forum · 7
Characterization Study Of Aluminium 6061 Hybrid Composite
2015 · U. Achutha Kini, S. S. Sharma, et al. · Zenodo (CERN European Organization for Nuclear Research) · 5
Surface Improvement of Shafts by Turn-Assisted Deep Cold Rolling Process
2016 · Raghavendra Prabhu, S. S. Sharma, et al. · MATEC Web of Conferences · 4
PDF
Characteristic study for low melting point MMC using stir casting technique
2013 · K. Jagannath, S. Sharma, et al. · World Journal of Engineering · 4
Deep Cold Rolling Process on AISI 4140 Steel and Optimization of Surface Roughness by Response Surface Methodology
2012 · P R Prabhu, S. M. Kulkarni, et al. · 3
Effect of Artificial Aging on Fracture Behavior of Al6061-Silica (SiO2) Composites
2016 · K. Jagannath, Sathya Shankar Sharma, et al. · Materials science forum · 2
Age Hardening and Cold Deformation Assisted Aging Treatment on the Characteristics of Quartz Powder Reinforced Stir-Cast Aluminium-Zinc Alloy Metal Matrix Composites
2014 · Shiv Shankar Sharma, K Jagannath, et al. · 2
Performance Evaluation of Thermoacoustic Refrigeration System
2014 · K Jagannath, Princeton Lobo · 2
Effect of Heat Treatment on Mechanical Properties of AISI 4147 Spring Steel
2013 · Sathyashankara Sharma, K Jagannath, et al. · 2
Optimization of drilling conditions of Glass fibre reinforced plastic composite material using genetic algorithm
2011 · Nanjangud Mohan, K Jagannath, et al. · 2
Comparison of Performance and Emission Characteristics of Biofuel and Diesel Fired Engine
2018 · P. Dinesha, K. Jagannath · Distributed Generation & Alternative Energy Journal · 1
Analysis Of Surface Hardness, Surface Roughness, And Near Surface Microstructure Of Aisi 4140 Steel Worked With Turn-Assisted Deep Cold Rolling Process
2015 · P. R. Prabhu, S. M. Kulkarni, et al. · Zenodo (CERN European Organization for Nuclear Research) · 1
Thermal Expansion Coefficient for Lead- Graphite and Lead-Iron Metal Matrix Composites
2012 · K Jagannath, Sathyashankara Sharma, et al. · 1
Prediction of Sound Attenuation Characteristics of Mufflers
2010 · Chandrashekhar Bhat, Sathyashankara Sharma, et al. · 1
Influence of higher injection pressure on the performance and emission characteristics of a Diesel engine fueled by Biofuel
2017 · P. Dinesha, K Jagannath, et al.
Performance enhancement of refrigerator with de-superheater
2016 · K Jagannath, Archith Gupta, et al.
Aging and Mechanical Characteristics of PrecipitationHardening Stir cast Al6061 Hybrid Composite
2016 · Sathyashankara Sharma, M C Gowri Shankar, et al.
Effect of the Process Parameters on Build Time in FusedDeposition Modeling using Taguchi Method
2016 · Achutha U Kini, S S Sharma, et al.
Design of Experiment Based Approach to Optimize Turn-Assisted Deep Cold Rolling Process Parameters
2014 · P R Prabhu, Sathyashankara Sharma, et al.
Waste Heat Recovery System for a Heavy Duty Six Cylinder Engine
2014 · Chandrashekhar Bhat, Sarthak Sharma, et al.
Analysis of Cryogenic assisted Ammonia-water power Cycle
2014 · K Jagannath, Sarthak Sharma, et al.
Design and Analysis of Nozzle Ribs in a Gas Turbine
2013 · Chandrashekhar Bhat, P D Deepak, et al.
Numerical Investigation of Heat Transfer Characteristics of Nozzle Ribs in a Gas Turbine Blade
2013 · Chandrashekhar Bhat, P D Deepak, et al.
Experimental Investigation of Surface Failure and Fatigue Life of Boron Steel
2012 · Chandrashekhar Bhat, A D Anoop, et al.
Works count: 36
Citation count: 47
H-index: 4
I10-index: 1
Year
Topic
Type