Get started
Author

Bekir Yalçın

Observed names: B Yalcın, B. Yalçın, Bekir YALÇIN, Bekir YALÇIN, Bekir Yalcin, Bekir Yalçin, Yalçın, Bekir
ORCID: 0000-0003-0102-7769
Observed ORCID: 0000-0003-0102-7769
OpenAlex ID: A5103033876
The effects of various cooling strategies on surface roughness and tool wear during soft materials milling
2008 · B. Yalçın, A.E. Özgür, et al. · Materials & Design (1980-2015) · 81
Effect of Drilling Parameters and Tool Geometry on the Thrust Force and Surface Roughness of Aerospace Grade Laminate Composites
2023 · Çağın Bolat, Uçan Karakılınç, et al. · Micromachines · 55
PDF
Optimization of Micro-Drilling of Laminated Aluminum Composite Panel (Al–PE) Using Taguchi Orthogonal Array Design
2023 · Bekir Yalçın, Ali Yüksel, et al. · Materials · 40
PDF
Comparative Analysis of Minimum Chip Thickness, Surface Quality and Burr Formation in Micro-Milling of Wrought and Selective Laser Melted Ti64
2023 · Uçan Karakılınç, Berkay Ergene, et al. · Micromachines · 40
PDF
Effect of Drilling Parameters and Tool Diameter on Delamination and Thrust Force in the Drilling of High-Performance Glass/Epoxy Composites for Aerospace Structures with a New Design Drill
2024 · Bekir Yalçın, Çağın Bolat, et al. · Polymers · 39
PDF
Microstructural and Mechanical Behavior Investigations of Nb-Reinforced Mg–Sn–Al–Zn–Mn Matrix Magnesium Composites
2023 · Ali Ercetin, Özgür Özgün, et al. · Metals · 29
PDF
Effect of Injection Parameters and Vacuum on the Strength and Porosity Amount of Die-Casted A380 Alloy
2016 · Bekir Yalçin, Murat Koru, et al. · International Journal of Metalcasting · 28
Effect of Porosity on the Mechanical Properties and WearPerformance of 2% Copper Reinforced Sintered Steel Used in Shock Absorber Piston Production
2009 · Bekir Yalçın · Journal of Material Science and Technology · 15
Optimization of Cutting Parameters to Minimize Wall Deformation in Micro-Milling of Thin-Wall Geometries
2025 · Ahmet Hasçelik, Kubilay Aslantas, et al. · Micromachines · 12
Surface Roughness and Cutting Forces in Turning of Tool Steel With Mixed Ceramic and Cubic Boron Nitride Cutting Tools
2015 · Bekir Yalçın · Transactions of the Canadian Society for Mechanical Engineering · 12
Hardness and Surface Roughness of 3D-Printed ASA Components Subjected to Acetone Vapor Treatment and Different Production Variables: A Multi-Estimation Work via Machine Learning and Deep Learning
2025 · Çağın Bolat, Furkancan Demircan, et al. · Polymers · 8
PDF
Cutting force and delamination optimization of nanoparticle-reinforced basalt/epoxy multi-scale composites in dry drilling by Taguchi design
2025 · Çağın Bolat, Emi̇ne Feyza Şükür, et al. · Multidiscipline Modeling in Materials and Structures · 4
Experimental investigation on the mechanical properties of Ti6Al4V cellular structures produced with selective laser melting: Effects of rib thickness, unit cell type and orientation
2024 · Berkay Ergene, Bekir Yalçın · Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering · 2
Investigation of Delamination and Cutting Force in the Drilling of AA7050-CFRP Hybrid Composite Stacks Used in Real Aerospace Applications
2026 · Furkan Taşcı, Abdülcelil Bayar, et al. · Polymers · 1
PDF
Tarımsal İlaçlamada Kullanılmak Üzere GPS Destekli Oransal Kontrolcü Biriminin Geliştirilmesi
2023 · Nazır Can ALADAĞ, Ali TAŞKIRAN, et al. · Türk Tarım ve Doğa Bilimleri Dergisi · 1
AB0324 Is low serum vitamin d level associated with increased neuropathic pain in rheumatoid arthritis patients? a cross-sectional study
2017 · H Yesil, U Sungur, et al. · Annals of the Rheumatic Diseases · 1
PDF
Mechanical behavior and weight reduction of titanium frameworks with topology‐optimized lattice structures for implant‐supported prostheses
2026 · Safa Ozden, Muhammed Esad Kayacan, et al. · Journal of Prosthodontics
Optimization of Multiple Drilling Parameters in Micro-drilling of Aerospace-Grade HexPly® 913 Composite
2026 · Ahmet Hasçelik, Ali Yüksel, et al. · Journal of Materials Engineering and Performance
Topology design and structural optimization of Co-Cr frameworks for implant-supported prostheses
2025 · Safa Özden, Muhammed Esad Kayacan, et al. · Journal of Prosthetic Dentistry
Taguchi Approach on Stress-Displacement Analyses in the Mounted Type Chassis of Agricultural Sprayer Machine
2023 · Ali Rıza BUĞDAYCI, Ali ÖNAL, et al. · Türk doğa ve fen dergisi :/Türk doğa ve fen dergisi
PDF
Comparative Analysis of Minimum Chip Thickness, Surface Quality and Burr Formation in Micro-Milling of Wrought and Selective Laser Melted Ti64
2023 · Bekir Yalçın, Uçan Karakılınç, et al. · SSRN Electronic Journal
4 boyutlu baskı teknolojisi ve uygulama alanlarının araştırılması
2020 · Berkay Ergene, Bekir Yalçın · DergiPark (Istanbul University)
Farklı malzemelere sahip hibrid kompozitlerde çatlağın mekanik davranışlara etkisinin analizi
2018 · Bekir YALÇIN, Berkay ERGENE · DOAJ (DOAJ: Directory of Open Access Journals)
Soğutucu Plakalarda Yüzey Geometri̇si̇ni̇n Ve Kanatçik Sayisinin Isi İleti̇mi̇ne Etki̇si̇ni̇n Sonlu Eleman Anali̇zi̇ İle Araştirilmasi
2015 · Bekir Yalçın · DergiPark (Istanbul University)
PDF
Ti-6Al-4V alaşımında sinterleme sıcaklığının gözenek oluşumu ve mikroyapı üzerine etkisi
2008 · Bekir Yalçın, Remzi Varol · Makine Teknolojileri Elektronik Dergisi (elektronik)
Works count: 26
Citation count: 368
H-index: 10
I10-index: 10
Year
Topic
Type