Get started
Author

B. Ravisankar

Observed names: B Ravisankar, B. RAVISANKAR, Ravisankar B, Ravisankar B.
ORCID: 0000-0002-5955-0475
Observed ORCID: 0000-0002-5955-0475
OpenAlex ID: A5107986002
Nucleation and growth of TiAl3 intermetallic phase in diffusion bonded Ti/Al Metal Intermetallic Laminate
2018 · N. Thiyaneshwaran, K. Sivaprasad, et al. · Scientific Reports · 100
PDF
Fabrication of corrosion resistant hydrophobic ceramic nanocomposite coatings on PEO treated AA7075
2017 · Arunnellaiappan T., Arun S., et al. · Ceramics International · 78
Hardness and wear behaviour of electroless Ni–B coatings
2016 · J. N. Balaraju, A. Priyadarshi, et al. · Materials Science and Technology · 73
The effect of graphite particle size on the corrosion and wear behaviour of the PEO-EPD coating fabricated on commercially pure zirconium
2019 · Arun S., Hariprasad S., et al. · Surface and Coatings Technology · 72
Effect of processing routes on microstructure and mechanical properties of 2014 Al alloy processed by equal channel angular pressing
2010 · P. VENKATACHALAM, S. RAMESH KUMAR, et al. · Transactions of Nonferrous Metals Society of China · 58
High temperature oxidation and corrosion behaviour of Ni/Ni–Co–Al composite coatings
2012 · Meenu Srivastava, J.N. Balaraju, et al. · Applied Surface Science · 47
Characterization based analysis on TiAl3 intermetallic phase layer growth phenomenon and kinetics in diffusion bonded Ti/TiAl3/Al laminates
2021 · N. Thiyaneshwaran, K. Sivaprasad, et al. · Materials Characterization · 45
Role of powder metallurgical processing and TiB reinforcement on mechanical response of Ti–TiB composites
2015 · M. Selvakumar, P. Chandrasekar, et al. · Materials Letters · 44
Diffusion bonding of SU 263
2008 · B. Ravisankar, J. Krishnamoorthi, et al. · Journal of Materials Processing Technology · 42
Surface characteristics of AC PEO coatings fabricated on commercial Al alloys
2022 · Premchand C., Manojkumar P., et al. · Surface and Coatings Technology · 26
Enhancing the strength of structural steel through severe plastic deformation based thermomechanical treatment
2018 · Murugan Nagaraj, B. Ravisankar · Materials Science and Engineering A · 26
Work hardening behavior of Ti/Al-based metal intermetallic laminates
2016 · N. Thiyaneshwaran, K. Sivaprasad, et al. · The International Journal of Advanced Manufacturing Technology · 25
Assessment of Corrosion and Scratch Resistance of Plasma Electrolytic Oxidation and Hard Anodized Coatings Fabricated on AA7075-T6
2021 · C. Premchand, S. Hariprasad, et al. · Transactions of the Indian Institute of Metals · 24
Workability Study on 99.04% Pure Aluminum Processed by ECAP
2014 · S. Surendarnath, K. Sankaranarayanasamy, et al. · Materials and Manufacturing Processes · 24
Improving the mechanical properties of 2024 Al alloy by cryo rolling
2010 · Devaiah Doppalapudi, P. Venkatachalam, et al. · Transactions of the Indian Institute of Metals · 22
Deformation behavior of Al/Cu in-situ metal-intermetallic laminates at low and high strain rates
2021 · Kartheek. S.M. Sonti, Biswaranjan Dash, et al. · Journal of Alloys and Compounds · 21
Investigation on the Effect of ECAP Routes on the Wear Behavior of AA2014
2017 · S. P. Divya, M. Nagaraj, et al. · Transactions of the Indian Institute of Metals · 21
A Comparative Study of Commercially Pure Aluminum Processed by ECAP Using Conventional and New Die
2014 · S. Surendarnath, K. Sankaranarayanasamy, et al. · Materials and Manufacturing Processes · 21
Densification of Al-Y2O3 composite powder by equal channel angular pressing
2010 · Ramu Yarra, P. Venkatachalam, et al. · Transactions of the Indian Institute of Metals · 20
ECAP of commercially pure titanium: A review
2008 · B. Ravisankar, Joong Keun Park · Transactions of the Indian Institute of Metals · 20
Effect of processing route on microstructure, mechanical and dry sliding wear behavior of commercially pure magnesium processed by ECAP with back pressure
2021 · Anil Babu Sankuru, Hareesh Sunkara, et al. · Transactions of the Indian Institute of Metals · 19
Assessing quality of diffusion bonded joints with interlayer using ultrasonic/ultrasound
2016 · S. Suresh Kumar, J. Krishnamoorthi, et al. · Journal of Materials Processing Technology · 19
Microstructural and Nanoindentation Studies Across Diffusion-bonded Interfaces in Al/Cu Metal Intermetallic Laminates
2014 · S.S.M. Kartheek, K.V. Vamsi, et al. · Procedia Materials Science · 17
PDF
Influence of Microstructure and Experimental Parameters on Mechanical and Wear Properties of Al-TiC Surface Composite by FSP Route
2012 · S. Jerome, S. Govind Bhalchandra, et al. · Journal of Minerals and Materials Characterization and Engineering · 17
PDF
Stress corrosion cracking of Al7075 alloy processed by equal channel angular pressing
2010 · S. Ramesh Kumar, Kondaiah Gudimetla, et al. · 16
Works count: 88
Citation count: 1,234
H-index: 20
I10-index: 42
Year
Topic
Type