Get started
Author

Chokri Bouraoui

Observed names: Bouraoui Chokri, Bouraoui, Chokri, C Bouraoui, C. Bouraoui, C. H. Bouraoui, CHokri Bouraoui
ORCID: 0009-0004-4639-2940
Observed ORCID: 0009-0004-4639-2940
OpenAlex ID: A5108459456
Finite element modelling of shot peening process: Prediction of the compressive residual stresses, the plastic deformations and the surface integrity
2006 · M. Frija, T. Hassine, et al. · Materials Science and Engineering A · 178
FDM technology and the effect of printing parameters on the tensile strength of ABS parts
2023 · Mohamed Daly, Mostapha Tarfaoui, et al. · The International Journal of Advanced Manufacturing Technology · 93
PDF
The overload effect on the crack-tip cyclic plastic deformation response in SA333 Gr 6 C-Mn steel
2018 · Ahmed Bahloul, Chokri Bouraoui · Theoretical and Applied Fracture Mechanics · 27
Experimental, analytical, and finite element study of stress concentration factors for composite materials
2016 · Mhalla Mohamed Makki, Bouraoui Chokri · Journal of Composite Materials · 26
Effect of carbon nanotubes on the in-plane dynamic behavior of a carbon/epoxy composite under high strain rate compression using SHPB
2020 · M Chihi, M Tarfaoui, et al. · Smart Materials and Structures · 25
Graphene nanofillers as a player to improve the dynamic compressive response and failure behavior of carbon/epoxy composite
2020 · M Chihi, M Tarfaoui, et al. · Nanotechnology · 24
Probabilistic approach for predicting fatigue life improvement of cracked structure repaired by high interference fit bushing
2016 · A. Bahloul, A. Ben Ahmed, et al. · The International Journal of Advanced Manufacturing Technology · 19
Effect of CNTs Additives on the Energy Balance of Carbon/Epoxy Nanocomposites during Dynamic Compression Test
2020 · Manel Chihi, Mostapha Tarfaoui, et al. · Polymers · 18
PDF
Prediction of fatigue crack growth life under variable-amplitude loading using finite element analysis
2019 · Amina Remadi, Ahmed Bahloul, et al. · Comptes Rendus Mécanique · 18
Advancing composite materials: Exploring thermomechanical properties of Aerosil/polycarbonate composites via additive manufacturing
2024 · Mohamed Daly, Manel Chihi, et al. · Journal of Manufacturing Processes · 15
PDF
Dynamic analysis of 3D-printed CF-PETG composites with different infill densities
2024 · Mohamed Daly, Mostapha Tarfaoui, et al. · Progress in Additive Manufacturing · 14
Experimental investigation of the effect of infill parameters on dynamic compressive performance of 3D-Printed carbon fiber reinforced polyethylene terephthalate glycol composites
2023 · Manel Chihi, Mostapha Tarfaoui, et al. · Journal of Thermoplastic Composite Materials · 14
Crack repair of SENT specimen using the interference fit process
2018 · Ahmed Bahloul, Mohamed Maki Mhalla, et al. · Journal of Alloys and Compounds · 13
Reliability prediction of the stress concentration factor using response surface method
2017 · Mhalla Mohamed Makki, Bahloul Ahmed, et al. · The International Journal of Advanced Manufacturing Technology · 12
High-Entropy Alloys: Advantages and Applications in Challenging Environments
2024 · Saad Khaldon Al-Ubaidy, Chokri Bouraoui · Annales de Chimie Science des Matériaux · 11
PDF
Fatigue life prediction under variable loading based on a new damage model devoted for defective material
2017 · Maroua Saggar, Haifa Sallem, et al. · The International Journal of Advanced Manufacturing Technology · 10
Affected depth approach to determine the fatigue strength of materials containing surface defects
2018 · Anouar Nasr, Wannes Hassine, et al. · Comptes Rendus Mécanique · 8
New fatigue limit assessment approach of defective material under fully reversed tension and torsion loading
2016 · Hassine Wannes, Anouar Nasr, et al. · Mechanics & Industry · 8
An efficient hybrid differential evolution–Jaya algorithm for enhancing vibration behaviour in automotive turbocharger systems
2023 · Ibrahim Mlaouhi, Najeh Ben Guedria, et al. · Engineering Optimization · 7
High-performance self-poled PVDF-BaTiO 3 -CNT nanocomposites: A multifunctional material for flexible next-generation energy harvesting and sensing
2025 · Ahmed Attaoui, Ayda Bouhamed, et al. · Nano Energy · 6
Optimization of Diffuser Angle to Reduce the Drag of a Light Car
2021 · Kamel Belhadj, Ali Helali, et al. · Lecture notes in mechanical engineering · 6
An engineering predictive approach of fatigue crack growth behavior: The case of the lug-type joint
2017 · Ahmed Bahloul, Amal Ben Ahmed, et al. · Comptes Rendus Mécanique · 6
PDF
An Adaptative Differential Evolution Algorithm for Vibration Level Reduction in Rotordynamics
2021 · Ibrahim Mlaouhi, Najeh Ben Guedria, et al. · Lecture notes in mechanical engineering · 5
Probabilistic fatigue crack growth assessment of Al 7075-T6 aerospace component
2017 · Ahmed Bahloul, Amal Ben Ahmed, et al. · Procedia Structural Integrity · 5
PDF
Long-term moisture degradation of rubber/bamboo-epoxy composites
2025 · Khaireddine Sabbagh, Rawdha Kessentini, et al. · International Journal of Mechanical Sciences · 4
Works count: 64
Citation count: 626
H-index: 13
I10-index: 16
Year
Topic
Type