Get started
Author

G. A. Kononenko

Observed names: A. A. Kononenko, Anna Kononenko, G. Kononenko, G.A. KONONENKO, G.A. Kononenko, G.А. Kononenko, G. A. Kononenko, Ganna A. Kononenko, Ganna Kononenko, H. A. Kononenko, H. А. Kononenko, H. A. Kononenko, Hanna Kononenko, Kononenko G., Г. Кононенко, Г.А. Кононенко, Ганна Андріївна Кононенко, Ганна Кононенко
Observed institutions: Ministry of Education and Science, National Metallurgical Academy of Ukraine, National Academy of Sciences of Ukraine, Poltava State Agrarian University, Iron and Steel Institute of Z. I. Nekrasov National Academy of Sciences of Ukraine, Ukrainian State University of Science and Technologies, Dnipro University of Technology, Oles Honchar Dnipro National University, Dnipro State Medical University
ORCID: 0000-0001-7446-4105
Observed ORCID: 0000-0001-7446-4105
OpenAlex ID: A5108750730
Influence of SLM-process parameters on the formation of the boundaries of parts of heat-resistant nickel alloy Inconel 718
2021 · S.V. Adzhamskiy, G.А. Kononenko, et al. · Kosmìčna nauka ì tehnologìâ · 19
PDF
Influence of Cooling Rate at Hardening of Continuous Casting Blank on Parameters of Dendritic Structure of Carbon Steel with 0.54% C
2021 · O. I. Babachenko, K. H. D’omina, et al. · METALLOFIZIKA I NOVEISHIE TEKHNOLOGII · 16
PDF
Implementation of Selective Laser Melting Technology in Ukraine
2022 · Sergey Adjamskiy, Ganna Kononenko, et al. · Наукова думка eBooks · 14
Analysis of Structure After Heat Treatment of Inconel 718 Heat-Resistant Alloys Made by SLM-Technology
2021 · S. V. Adzhamskyy, H. A. Kononenko, et al. · METALLOFIZIKA I NOVEISHIE TEKHNOLOGII · 14
PDF
Influence of technological parameters of slm-process on porosity of metal products
2020 · S.V. Adjamskiy, G.A. Kononenko, et al. · Avtomatičeskaâ svarka (Kiev) · 13
Investigation of plastic properties of AISI 316l steel by method of registration of macrolocalization fields
2021 · Sergey Adjamskiy, Rostislav Podolskyi, et al. · System technologies · 11
PDF
ДОСЛІДЖЕННЯ ВПЛИВУ ОРІЄНТУВАННЯ ТА ТОВЩИНИ ШАРУ ДРУКУ НА ФІЗИКО-МЕХАНІЧНІ ВЛАСТИВОСТІ СПЛАВУ Co-Cr-Mo, ВИГОТОВЛЕНОГО МЕТОДОМ СЛП
2022 · С. Аджамський, Г. Кононенко, et al. · Science and innovation · 10
PDF
Дослідження ефективності електрохімічного полірування зразків змінного перерізу з різною шорсткістю зі сталі AISI 316L, виготовлених за технологією SLM
2021 · Сергій Вікторович Аджамський, Ганна Андріївна Кононенко, et al. · Aerospace technic and technology · 10
PDF
Розробка Розрахункової Моделі Зміни Температури Рейкової Сталі К76ф Для Визначення Параметрів Термічної Обробки
2021 · Олександр Бабаченко, Ганна Кононенко, et al. · Science and innovation · 9
PDF
Influence of technological parameters of slm-process on porosity of metal products
2020 · S.V. Adjamskyi, G.A. Kononenko, et al. · The Paton Welding Journal · 9
Симуляция Влияния Остаточных Напряжений И Параметров Slm-технологии На Формирование Области Границ Изделия Из Жаропрочного Никелевого Сплава Inconel 718
2020 · Sergey Adjamsky, Ganna Kononenko, et al. · International scientific and technical conference Information technologies in metallurgy and machine building · 9
PDF
Solubility of carbon, manganese and silicon in γ-iron of Fe-Mn-Si-C alloys
2020 · N. Y. Filonenko, O. I. Babachenko, et al. · Physics and Chemistry of Solid State · 8
PDF
Mechanical Properties and Microstructure of the 316L Steel Produced by Different Methods
2023 · S. V. Adjamsky, G. A. Kononenko, et al. · Powder Metallurgy and Metal Ceramics · 7
Analysis of the Structure of Samples of Rail Steels of the New Generation with Improved Operational Properties. Pt. 2
2023 · O. I. Babachenko, G. A. Kononenko, et al. · METALLOFIZIKA I NOVEISHIE TEKHNOLOGII · 7
PDF
Structure and Fracture Resistance of Steels in Different Zones of Railway Axles
2022 · O. I. Babachenko, H. A. Kononenko, et al. · Materials Science · 7
Influence of the Time Interval between the Deposition of Layers by the SLM Technology on the Structure and Properties of Inconel 718 Alloy
2021 · S. V. Adjamsky, Z. V. Sazanishvili, et al. · Materials Science · 7
Development of Promising Steels for Railway Rails of a New Generation Using Modeling of Phase-Structural Transformations
2024 · Oleksii Merkulov, Rostislav Podolskyi, et al. · Transactions of the Indian Institute of Metals · 6
Improving the efficiency of the SLM-process by adjusting the focal spot diameter of the laser beam
2021 · S.V. Adjamskyi, G.A. Kononenko, et al. · The Paton Welding Journal · 6
Mechanical properties of heat-resistant superalloy Inconel 718 obtained by selective laser melting and heat treatment under different load directions
2020 · S. Adjamskiy, G. Kononenko, et al. · Scientific journal of the Ternopil national technical university · 6
Analysis of Structure of Samples of Rail Steels of the New Generation with Improved Operational Properties. Pt. 1
2022 · O. I. Babachenko, G. A. Kononenko, et al. · METALLOFIZIKA I NOVEISHIE TEKHNOLOGII · 5
Comparative study of mechanical properties of 316L steel samples made on the ALFA-150 machine in compliance with world analogues
2022 · G. A. Kononenko, S. V. Adjamsky, et al. · Fundamental and applied problems of ferrous metallurgy · 5
Application of SLM-technology for manufacture of dental implants from Ti–6Al–4V alloy
2021 · S.V. Adjamskyi, G.A. Kononenko, et al. · The Paton Welding Journal · 5
Mechanical Properties of Inconel 718 Alloy Produced Using Selective Laser Melting Technology with Dynamic Focusing on Application Surface
2023 · S. V. Adzhamskyi, G. A. Kononenko, et al. · Materials Science · 4
Influence of heat treatment of specimens from Ti6Al4V manufactured by the technology of selective laser melting on structure and mechanical properties
2022 · S.V. Adjamskiy, G.A. Kononenko, et al. · The Paton Welding Journal · 4
Modern perspective metal materials for armored obstacle (overview)
2022 · G. A. Kononenko, T. V. Kimstach, et al. · Fundamental and applied problems of ferrous metallurgy · 4
Works count: 110
Citation count: 297
H-index: 9
I10-index: 8
Year
Topic
Type