Author

M. Sahli

Observed names: M. L. Sahli, Mohamed Lakhdar SAHLI, Mohamed Lakhdar Sahli, Mohamed Sahli, Mohamed. Sahli, Sahli M, Sahli M., Sahli Mohamed, Sahli Mohamed Lakhdar, Sahli, Mohamed, Sahli, Mohamed Lakdhar, mohamed sahli

Institutions: University Frères Mentouri Constantine 1, Centre National de la Recherche Scientifique, École Nationale Supérieure d'Ingénieurs de Caen, Commissariat à l'Énergie Atomique et aux Énergies Alternatives, Normandie Université, Centre de Recherche sur les Ions, les Matériaux et la Photonique, Université de Caen Normandie

Observed institutions: University Frères Mentouri Constantine 1, Centre National de la Recherche Scientifique, École Nationale Supérieure d'Ingénieurs de Caen, Commissariat à l'Énergie Atomique et aux Énergies Alternatives, Franche-Comté Électronique Mécanique Thermique et Optique - Sciences et Technologies, Université de technologie de belfort-montbéliard, Normandie Université, Université Bourgogne Franche-Comté, Centre de Recherche sur les Ions, les Matériaux et la Photonique, École Nationale Supérieure de Mécanique et des Microtechniques, Université de Franche-Comté, Université de Caen Normandie

ORCID: 0000-0002-8690-5366

Observed ORCID: 0000-0002-8690-5366

OpenAlex ID: A5110126811

Experimental investigation of microtextured cutting tool performance in titanium alloy via turning

2021 · A. Fouathiya, S. Meziani, et al. · Journal of Manufacturing Processes · 64

Influence of particle-size distribution and temperature on the rheological properties of highly concentrated Inconel feedstock alloy 718

2017 · Claudel Dimitri, Sahli Mohamed, et al. · Powder Technology · 46

Physical modelling, numerical simulation and experimental investigation of microfluidic devices with amorphous thermoplastic polymers using a hot embossing process

2015 · Gang Cheng, Mohamed Sahli, et al. · Journal of Materials Processing Technology · 36

Experimental analysis and finite element simulation of the co-sintering of bi-material components

2014 · H. Ou, M. Sahli, et al. · Powder Technology · 31

Numerical simulation and experimental analysis of solid-state sintering response of 316 L stainless steel micro-parts manufactured by metal injection molding

2015 · M. Sahli, A. Lebied, et al. · The International Journal of Advanced Manufacturing Technology · 30

The manufacturing and replication of microfluidic mould inserts by the hot embossing process

2012 · M. Sahli, C. Millot, et al. · Journal of Materials Processing Technology · 30

Thermoplastic filled with magnetocaloric powder

2015 · J. Lanzarini, T. Barriere, et al. · Materials & Design · 27

Quality assessment of polymer replication by hot embossing and micro-injection moulding processes using scanning mechanical microscopy

2009 · M. Sahli, C. Millot, et al. · Journal of Materials Processing Technology · 27

Multiphysics modelling and experimental investigations of the filling and curing phases of bi-injection moulding of thermoplastic polymer/liquid silicone rubbers

2017 · H. Ou, M. Sahli, et al. · The International Journal of Advanced Manufacturing Technology · 25

Development of a feedstock formulation based on polypropylene for micro-powder soft embossing process of 316L stainless steel micro-channel part

2013 · M. Sahli, J.-C. Gelin · The International Journal of Advanced Manufacturing Technology · 21

Finite element simulation and experimental investigation of the effect of clearance on the forming quality in the fine blanking process

2020 · M. Sahli, X. Roizard, et al. · Microsystem Technologies · 20

Modelling and numerical simulation of steel sheet fine blanking process

2020 · Mohamed Sahli, Xavier Roizard, et al. · Procedia Manufacturing · 19

Experimental and numerical investigations of bi-injection moulding of PA66/LSR peel test specimens

2020 · M. Sahli, T. Barrière, et al. · Polymer Testing · 18

Experimental characterisation and modelling of rheokinetic properties of different silicone elastomers

2017 · H. Ou, M. Sahli, et al. · The International Journal of Advanced Manufacturing Technology · 18

Process parameter effects on dimensional accuracy of a hot embossing process for polymer-based micro-fluidic device manufacturing

2014 · G. Cheng, M. Sahli, et al. · The International Journal of Advanced Manufacturing Technology · 18

Characterisation and replication of metallic micro-fluidic devices using three different powders processed by hot embossing

2013 · M. Sahli, J.-C. Gelin, et al. · Powder Technology · 18

Replication of microchannel structures in WC–Co feedstock using elastomeric replica moulds by hot embossing process

2015 · M. Sahli, J.-C. Gelin, et al. · Materials Science and Engineering C · 17

Determination of the activation energy of silicone rubbers using different kinetic analysis methods

2016 · Huibin Ou, Mohamed Sahli, et al. · MATEC Web of Conferences · 14

PDF

Numerical simulations and experimental results of tensile behaviour of hybrid composite shape memory alloy wires embedded structures

2015 · A. Lebied, B. Necib, et al. · The International Journal of Advanced Manufacturing Technology · 14

Numerical Modelling of the Polymers Replication in Micro-Cavities by the Roll Embossing Process

2010 · M. Sahli, J-C Gelin, et al. · International Journal of Material Forming · 14

Investigating mechanical, thermal and rheological properties of polypropylene/carbon nanotubes composites

2020 · M. Sahli, T. Barrière, et al. · Microsystem Technologies · 13

Numerical modelling and experimental analysis of the passenger side airbag deployment in out-of-position

2017 · D. Bendjaballah, A. Bouchoucha, et al. · International Journal of Crashworthiness · 11

Roll manufacturing of polymer microfluidic devices using a roll embossing process

2015 · J. Zhang, M. Sahli, et al. · Sensors and Actuators A Physical · 11

The smart materials and their applications in the engineering fields

2015 · Brahim Necib, Abderrezak Gharbi, et al. · National Symposium on Information Technology: Towards New Smart World (NSITNSW) · 11

Rapid replication of metal microstructures using micro-powder hot embossing process

2014 · J. Zhang, M. Sahli, et al. · The International Journal of Advanced Manufacturing Technology · 11

Works count: 119

Citation count: 741

H-index: 17

I10-index: 28