Get started
Author

E. H. Ouakdi

Observed names: E OUAKDI, E. H. OUAKDI, E.H. Ouakdi, El Hadj Ouakdi, El-Hadj Ouakdi, Elhadj H. Ouakdi, Elhadj Ouakdi, Ouakdi, E.H., Ouakdi, El-Hadj
OpenAlex ID: A5111576619
Evaluation of springback under the effect of holding force and die radius in a stretch bending test
2011 · E.H. Ouakdi, R. Louahdi, et al. · Materials & Design (1980-2015) · 52
Constitutive modelling effect on the numerical prediction of springback due to a stretch-bending test applied on titanium T40 alloy
2015 · A. Maati, L. Tabourot, et al. · Archives of Civil and Mechanical Engineering · 8
Anisotropic thermomechanical behavior of AA6082 aluminum alloy Al–Mg–Si–Mn
2017 · Ali Debih, El Hadj Ouakdi · International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde) · 4
The Effect of Defect Annihilation on the Segregation Kinetics of Sulphur in Both Quenched and Cold Worked Nickel
1998 · R LOUAHDI, E OUAKDI, et al. · Canadian Metallurgical Quarterly · 4
Effects of coating, holding force, stretching height, yield stress, and surface roughness on springback of steel in the V-stretch bending test
2022 · Imene Abdedaim, Elhadj Ouakdi, et al. · Materials Testing · 3
Effect of anodization treatment on the mechanical properties and fatigue behavior of AA2017-T4 aluminum alloy Al–Cu–Mg1
2019 · Ali Debih, El Hadj Ouakdi · International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde) · 3
Effect of Welding Parameters in the Microstructure and Mechanical Properties of Friction-Welded Joints of 100Cr6 Steel
2019 · M. Demouche, E. H. Ouakdi, et al. · DOAJ (DOAJ: Directory of Open Access Journals) · 3
A physical model describing the visco-plastic behaviour of aluminium under tension and under creep forT > 0.4T m
1996 · E. H. Ouakdi, R. Louahdi, et al. · Journal of Materials Science Letters · 3
The effect of non-equilibrium grain boundary segregation on the tensile properties and the electrochemical behaviour of nickel
1997 · R. Louahdi, E. H. Ouakdi, et al. · Journal of Materials Science Letters · 2
A Novel Constitutive Modelling for Spring Back Prediction in Sheet Metal Forming Processes
2019 · Ahmed Maati, Laurent Tabourot, et al. · Lecture notes in mechanical engineering · 1
Numerical Simulation of Springback during an Operation of V-Bending, Application to Titanium and Aluminum Sheets
2013 · Ahmed Maati, Virginie Pouzols, et al. · Advanced materials research · 1
A constitutive model describing the necking behaviour of aluminium during tension and creep
1998 · E. H. Ouakdi, R. Louahdi, et al. · Journal of Materials Science Letters · 1
Modélisation physique du comportement plastique de l'aluminium à moyenne température : application à l'étude de la striction
1988 · El-Hadj Ouakdi · HAL · 1
PDF
Investigation of the Effect of Rotation Speed and Post-Weld Heat Treatment on Mechanical Properties and Structure of Friction Stir Welding AA6061 Joints
2025 · Fatima Bouchelouche, Ali Debih, et al. · SAE International Journal of Materials and Manufacturing
A contribution to the modelling of creep behaviour of FCC metals
2021 · Ahmed Maati, El Hadj Ouakdi, et al. · Comptes Rendus Mécanique
PDF
A new constitutive modelling for springback prediction in sheet metal forming processes
2017 · Ahmed, Maati, Balland, Pascale, et al. · HAL
Effect of the Thermomechanical Treatment on the Springback During a Forming
2015 · E. H. Ouakdi, A. Soualem, et al. · International Review of Civil Engineering (IRECE)
A New Model for the Determination of Grain Boundary Diffusivities
2001 · R. Louahdi, E. H. Ouakdi, et al. · Revue Sciences Humaines (Université des Frères Mentouri Constantine 1)
Untitled
1997 · R. LOUAHDI, E. H. OUAKDI, et al. · Journal of Materials Science Letters
Physical modelisation of plastic behaviour of aluminium at medium temperature: application to necking study
1988 · Ouakdi, El-Hadj · OpenGrey (Institut de l'Information Scientifique et Technique)
Works count: 21
Citation count: 86
H-index: 4
I10-index: 1
Year
Topic
Type