Author

Chung-Yung Wu

Observed name: Wu, Chung-yung

Institution: China Steel (Taiwan)

Observed institution: China Steel (Taiwan)

OpenAlex ID: A5112007653

Effects of heat treatment processes on the microstructures and properties of powder metallurgy produced Cu–Ni–Si–Cr alloy

2014 · Huei-Sen Wang, Hou-Guang Chen, et al. · Materials Science and Engineering A · 49

Improvement in strength and thermal conductivity of powder metallurgy produced Cu–Ni–Si–Cr alloy by adjusting Ni/Si weight ratio and hot forging

2015 · Huei-Sen Wang, Hou-Guang Chen, et al. · Journal of Alloys and Compounds · 44

Effects of Manufacturing Parameters in Planar Flow Casting Process on Ribbon Formation and Puddle Evolution of Fe–Si–B Alloy

2015 · Yu-Guang Su, Falin Chen, et al. · ISIJ International · 25

Automated condition classification of a reciprocating compressor using time–frequency analysis and an artificial neural network

2006 · Yih-Hwang Lin, Hsien-Chang Wu, et al. · Smart Materials and Structures · 21

Effect of surface roughness of chill wheel on ribbon formation in the planar flow casting process

2015 · Yu-Guang Su, Falin Chen, et al. · Journal of Materials Processing Technology · 17

Automated valve condition classification of a reciprocating compressor with seeded faults: experimentation and validation of classification strategy

2009 · Yih-Hwang Lin, Huai-Sheng Liu, et al. · Smart Materials and Structures · 16

Simulation for the Effect of Wetting Conditions of Melt Puddle on the Fe–Si–B Ribbon Alloy in the Planar-Flow Melt-Spinning Process

2017 · Yu-Guang Su, Falin Chen, et al. · ISIJ International · 14

Tuning the Planar-Flow Melt-Spinning Process Subject to Operability Conditions

2014 · Yu-Guang Su, Falin Chen, et al. · JOM · 14

Automated Fault Classification of Reciprocating Compressors from Vibration Data: A Case Study on Optimization Using Genetic Algorithm

2014 · Yih-Hwang Lin, Wen-Sheng Lee, et al. · Procedia Engineering · 7

Development of the precipitation and dispersion hardened powder metallurgy Cu-Ni-Si-Cr + Al2O3 alloy

2017 · Huei-Sen Wang, Hou-Guang Chen, et al. · Journal of Alloys and Compounds · 6

Boiling Phenomena of Cooling Water in the Permanent Mold

2015 · Fu-Yuan Hsu, Po-Sen Chen, et al. · International Journal of Metalcasting · 3

Global workpiece positioning system (GWPS) Part 1: Concept and development of a laser probe based system

1999 · Chung-Yung Wu, Gary L. Neal, et al. · Journal of Manufacturing Systems · 3

A Novel Signal Processing Approach for Valve Health Condition Classification of a Reciprocating Compressor with Seeded Faults Considering Time-Frequency Partitions

2013 · Yih‐Hwang Lin, Wen-Sheng g Lee, et al. · Journal of Marine Science and Technology · 2

Global workpiece positioning system (GWPS) Part 2: Development of an ultrasonics-based system

1999 · Chung-Yung Wu, Gary L. Neal, et al. · Journal of Manufacturing Systems · 1

[[alternative]]A Study on The Life Changes of Hypnotherapy Upon Depresive Patient

2005 · 吳忠勇, Wu, Chung-yung · Nanhua University Institutional Repository

Works count: 15

Citation count: 222

H-index: 8

I10-index: 8