Get started
Author

M. Azzaz

Observed names: AZZAZ M., Azzaz Mohamed, Azzaz Mohammed, Azzaz, Mohamed, Azzaz, Mohammed, M Azzaz, M. AZZAZ, Mohamed AZZAZ, Mohamed Azzaz, Mohamed Cherif Azzaz, Mohamed Shaker Azzaz, Mohammed Azzaz
Observed institutions: Université de Technologie de Compiègne, Centre National de la Recherche Scientifique, University of Sciences and Technology Houari Boumediene, University Yahia Fares of Medea, Biomécanique et Bioingénierie, Institut National Polytechnique de Lorraine, École Nationale Supérieure des Mines de Nancy
OpenAlex ID: A5113607569
Structural and microwave absorption properties of nanostructured Fe–Co alloys
2011 · S. Bergheul, F. Otmane, et al. · Advanced Powder Technology · 30
Characterization of nanostructured magnetic alloy based on Ni-Co-Mn produced by mechanical synthesis
2021 · M. Triki, H. Mechri, et al. · Journal of Magnetism and Magnetic Materials · 23
Microstructural, electrical and magnetic properties of Fe35Co65 thin films grown by thermal evaporation from mechanically alloyed powders
2014 · N. Redjdal, H. Salah, et al. · Thin Solid Films · 20
Finite element simulation of mechanical behaviour of nickel-based metallic foam structures
2008 · Sid-Ali Kaoua, Djaffar Dahmoun, et al. · Journal of Alloys and Compounds · 20
Plastic deformation, extended stacking faults and deformation twinning in single crystalline indium phosphide 2. S doped InP
1996 · Mohamed Azzaz, Jean-Pierre Michel, et al. · Philosophical magazine. A/Philosophical magazine. A. Physics of condensed matter. Structure, defects and mechanical properties · 20
X-Ray Diffraction, Microstructure, and Mössbauer Studies of Fe72Al28 Alloy Elaborated by Mechanical Milling
2011 · Z. Hamlati, A. Guittoum, et al. · Journal of Materials Engineering and Performance · 17
Plastic deformation, extended stacking faults and deformation twinning in single crystalline indium phosphide 1. Undoped InP
1994 · Mohamed Azzaz, Jean-Pierre Michel, et al. · Philosophical magazine. A/Philosophical magazine. A. Physics of condensed matter. Structure, defects and mechanical properties · 15
Structural, Morphological, and Electrochemical Corrosion Properties of TiO2 Formed on Ti6Al4V Alloys by Anodization
2018 · Djamila Atmani, Nadia Saoula, et al. · Crystal Research and Technology · 14
Magnetic Properties and Resistivity Measurement of Nanocrystalline Cu70Fe18Co12Alloys
2015 · W. Laslouni, Z. Hamlati, et al. · Acta Physica Polonica A · 14
PDF
TEM observations of dislocations in aluminium nitride after high temperature deformation
2000 · M. Azzaz, J.P. Michel, et al. · Materials Science and Engineering B · 14
Numerical modelling of open-cell metal foam with Kelvin cell
2015 · Sid Ali Kaoua, Salah Boutaleb, et al. · Computational and Applied Mathematics · 12
Elaboration and characterization of metallic foams based on tin–lead
2008 · Abd-Elmouneïm Belhadj, Sid-Ali Kaoua, et al. · Materials Science and Engineering A · 12
Dissolution of Al 6%wt c Mixture Using Mechanical Alloying
2019 · R. Dabouz, Meriem Bendoumia, et al. · Defect and diffusion forum/Diffusion and defect data, solid state data. Part A, Defect and diffusion forum · 11
Electromagnetic Properties in Nanostructured Alloy Cu70Co30Obtained by a Non-Equilibrium Method
2016 · W. Laslouni, M. Azzaz · Acta Physica Polonica A · 11
PDF
Numerical modelling of twin helical spring under tensile loading
2010 · Sid Ali Kaoua, Kamel Taibi, et al. · Applied Mathematical Modelling · 11
Formation and Magnetic Properties of Nanocrystalline Fe60Co40 Alloys Produced by Mechanical Alloying
2006 · S. Bergheul, H. Tafat, et al. · Journal of Materials Engineering and Performance · 11
Nanostructured FeAlPO5/kaolin composite catalyst: Role of spin-orbit splitting in exhaust gas conversion
2026 · N. Ouarab, N. Baadji, et al. · Materials Chemistry and Physics · 10
Microstructure and Tribological Behavior of In Situ TiC-Ni(Si,Ti) Composites Elaborated from Ni and Ti3SiC2 Powders
2020 · Nabil Chiker, Abdessabour Benamor, et al. · Journal of Materials Engineering and Performance · 9
Monitoring of metal powder by eddy current
2010 · Ahmed Haddad, Mourad Zergoug, et al. · International Journal of Microstructure and Materials Properties · 9
Structure and properties of nanocrystalline Cu70Fe18Co12 obtained by mechanical alloying
2007 · Warda Laslouni, Kamel Taibi, et al. · Journal of Non-Crystalline Solids · 9
In-situ HT-XRD study of B2 structure of Ni-Co-Mn-Al Heusler alloy prepared by mechanical alloying
2021 · M. Triki, H. Mechri, et al. · Materials Letters · 8
Modified polystyrene waste in the adsorptive removal of crystal violet and Cu (II) ion from aqueous medium – Groundwater applicability, modelling and characterization studies
2025 · Nadjib Dahdouh, Bouallouche Rachida, et al. · Reactive and Functional Polymers · 7
Pressureless sintering and tribological properties of in-situ TiC-Ni3(Al,Ti)/Ni(Al,Ti) composites
2021 · Nabil Chiker, Abdessabour Benamor, et al. · International Journal of Refractory Metals and Hard Materials · 7
Synthesis and characterization of nanocristalline Fe-40 at.% Si alloy prepared by high energy ball milling
2013 · Lotfi Faghi, Salim Triaa, et al. · International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde) · 7
Infiltration behavior of Cu and Ti fillers into Ti2AlC/Ti3AlC2 composites during tungsten inert gas (TIG)brazing
2017 · N. Chiker, A. Haddad, et al. · Ceramics International · 6
Works count: 106
Citation count: 450
H-index: 12
I10-index: 17
Year
Topic
Type