Get started
Author

Sofiane Belhabib

Use of rigid-body motion for the investigation and estimation of the measurement errors related to digital image correlation technique
2007 · H. Haddadi, S. Belhabib · Optics and Lasers in Engineering · 244
Additive manufacturing of biomaterials for bone tissue engineering – A critical review of the state of the art and new concepts
2022 · Marie-Michèle Germaini, Sofiane Belhabib, et al. · Progress in Materials Science · 185
PDF
Printability and Tensile Performance of 3D Printed Polyethylene Terephthalate Glycol Using Fused Deposition Modelling
2019 · Sofiane Guessasma, Sofiane Belhabib, et al. · Polymers · 147
PDF
Challenges of additive manufacturing technologies from an optimisation perspective
2015 · Sofiane Guessasma, Weihong Zhang, et al. · International Journal for Simulation and Multidisciplinary Design Optimization · 135
PDF
Anisotropic damage inferred to 3D printed polymers using fused deposition modelling and subject to severe compression
2016 · Sofiane Guessasma, Sofiane Belhabib, et al. · European Polymer Journal · 121
Microstructure and Mechanical Performance of 3D Printed Wood-PLA/PHA Using Fused Deposition Modelling: Effect of Printing Temperature
2019 · Sofiane Guessasma, Sofiane Belhabib, et al. · Polymers · 106
PDF
Microstructure, Thermal and Mechanical Behavior of 3D Printed Acrylonitrile Styrene Acrylate
2019 · Sofiane Guessasma, Sofiane Belhabib, et al. · Macromolecular Materials and Engineering · 88
Material extrusion of plant biopolymers: Opportunities & challenges for 3D printing
2018 · Laurent Chaunier, Sofiane Guessasma, et al. · Additive manufacturing · 73
Effect of printing temperature on microstructure, thermal behavior and tensile properties of 3D printed nylon using fused deposition modeling
2020 · Sofiane Guessasma, Sofiane Belhabib, et al. · Journal of Applied Polymer Science · 71
Structural imperfections in additive manufacturing perceived from the X-ray micro-tomography perspective
2016 · Hedi Nouri, Sofiane Guessasma, et al. · Journal of Materials Processing Technology · 70
PDF
Compression performance of hollow structures: From topology optimisation to design 3D printing
2017 · Sofiane Belhabib, Sofiane Guessasma · International Journal of Mechanical Sciences · 68
Mechanical and Thermal Properties of 3D Printed Polycarbonate
2022 · Anis Bahar, Sofiane Belhabib, et al. · Energies · 58
PDF
Small-scale food process engineering — Challenges and perspectives
2017 · Hugo De Vries, Michel Mikolajczak, et al. · Innovative Food Science & Emerging Technologies · 57
Heterogeneous tensile test on elastoplastic metallic sheets: Comparison between FEM simulations and full-field strain measurements
2007 · S. Belhabib, H. Haddadi, et al. · International Journal of Mechanical Sciences · 53
Understanding the microstructural role of bio-sourced 3D printed structures on the tensile performance
2019 · Sofiane Guessasma, Sofiane Belhabib, et al. · Polymer Testing · 50
PDF
Microstructural defects induced by stereolithography and related compressive behaviour of polymers
2017 · Tao Liu, Sofiane Guessasma, et al. · Journal of Materials Processing Technology · 47
Significance of pore percolation to drive anisotropic effects of 3D printed polymers revealed with X-ray μ-tomography and finite element computation
2015 · Sofiane Guessasma, Sofiane Belhabib, et al. · Polymer · 47
Improving the characterization of a hardening law using digital image correlation over an enhanced heterogeneous tensile test
2012 · H. Haddadi, S. Belhabib · International Journal of Mechanical Sciences · 45
Functionally graded materials from topology optimisation and stereolithography
2018 · Tao Liu, Sofiane Guessasma, et al. · European Polymer Journal · 44
The Thermal and Mechanical Behaviour of Wood-PLA Composites Processed by Additive Manufacturing for Building Insulation
2023 · Anis Bahar, Ameur El Amine Hamami, et al. · Polymers · 42
PDF
Thermal cycling, microstructure and tensile performance of PLA-PHA polymer printed using fused deposition modelling technique
2019 · Sofiane Guessasma, Sofiane Belhabib, et al. · Rapid Prototyping Journal · 42
Printability of co-polyester using fused deposition modelling and related mechanical performance
2018 · Khaoula Abouzaid, Sofiane Guessasma, et al. · European Polymer Journal · 33
Effect of Printing Parameters on Mechanical Behaviour of PLA-Flax Printed Structures by Fused Deposition Modelling
2021 · Yassine Elias Belarbi, Sofiane Guessasma, et al. · Materials · 31
PDF
On the Tensile Behaviour of Bio-Sourced 3D-Printed Structures from a Microstructural Perspective
2020 · Sofiane Guessasma, Sofiane Belhabib, et al. · Polymers · 26
PDF
Analysis of microstructure and mechanical performance of polymeric cellular structures designed using stereolithography
2017 · Sofiane Guessasma, Liu Tao, et al. · European Polymer Journal · 26
Works count: 72
Citation count: 2,144
H-index: 25
I10-index: 35
Year
Topic
Type