Get started
Author

Zhenrong Yan

Structural optimization of light-weight battery module based on hybrid liquid cooling with high latent heat PCM
2020 · Xiaoyu Wu, Zehua Zhu, et al. · International Journal of Heat and Mass Transfer · 101
Optimization study of return vent height for an impinging jet ventilation system with exhaust/return-split configuration by TOPSIS method
2020 · Xiao Ye, Yanming Kang, et al. · Building and Environment · 89
Study of multi-objective optimization of overall ventilation performance for an impinging jet ventilation system using Taguchi-based grey relational analysis
2020 · Xiao Ye, Yanming Kang, et al. · Building and Environment · 40
Failure mechanism of superheater tubes of waste heat boiler for waste incineration in complex environment
2022 · Zhenrong Yan, Li Wang, et al. · Engineering Failure Analysis · 30
Unravelling the morphology effect of Pt/In2O3 catalysts for highly efficient hydrogen production by methanol steam reforming
2024 · Lini Liao, Yong Men, et al. · Fuel · 29
Performance analysis of acceleration effect on paraffin melting in finned copper foam
2021 · Jincheng Tang, Yongqi Xie, et al. · Applied Thermal Engineering · 24
PDF
Crystal plasticity finite element method investigation of normal tensile deformation anisotropy in rolled pure titanium sheet
2024 · Gang Chen, Yuanming Huo, et al. · Thin-Walled Structures · 19
Experimental investigation and crystal plasticity modelling of dynamic recrystallisation in dual-phase high entropy alloy during hot deformation
2024 · Zixin Zhou, Yuanming Huo, et al. · Materials Science and Engineering A · 17
Lattice BGK simulations of the double diffusive mixed convection in an enclosure with different outlet locations
2015 · Hongtao Xu, Beibei Li, et al. · International Journal of Heat and Mass Transfer · 16
Oxygen vacancy engineering in ZnO/ZrO2 composite catalysts for highly enhanced hydrogen production by methanol steam reforming
2024 · Yueming Wang, Yong Men, et al. · Colloids and Surfaces A Physicochemical and Engineering Aspects · 15
Quantum chemical calculations for the H free radical chemisorption with different chain models during oil shale pyrolysis
2020 · Xiao Ye, Anyao Jiao, et al. · Fuel · 15
Microstructure and nanoindentation creep behavior of NiAlCrFeMo high-entropy alloy
2025 · Yue Sun, Yuanming Huo, et al. · Journal of Alloys and Compounds · 14
Thermal deviation mechanisms for coupled heat transfer between the combustion side and the furnace tube side in the tubular heating furnace
2024 · Feilong Liao, Zhenrong Yan, et al. · Applied Thermal Engineering · 7
Microstructure evolution and mechanical properties of NiAlCrFeMo high entropy superalloy after different annealing treatment
2024 · Wenhan Yu, Yuanming Huo, et al. · Intermetallics · 7
Establishing a unified viscoplastic constitutive equation for EA4T steel: Comparative analysis with Arrhenius model
2024 · Hao Chen, Yuanming Huo, et al. · International Journal of Non-Linear Mechanics · 7
An unified viscoplastic micro-damage constitutive model for NiAlCrFeMo high-entropy alloys at elevated temperatures considering triaxiality stress
2025 · Hao Chen, Yuanming Huo, et al. · Journal of Alloys and Compounds · 4
Finite Element Simulation and Process Analysis for Hot-Forming WE43 Magnesium Alloy Fasteners: Comparison of Crystal Plasticity with Traditional Method
2025 · Anqi Jiang, Yuanming Huo, et al. · Metals · 4
Three-dimensional interconnected metal foam-supported Co3O4 nanoarrays for highly efficient hydrogen production via ammonia decomposition
2025 · Zaiwei Lu, Yong Men, et al. · International Journal of Hydrogen Energy · 3
Microstructure and Mechanical Properties of NiAlCrFeMo High-Entropy Alloy Sheet under Different Hot-Rolling Parameters
2025 · Xinyu Wang, Yuanming Huo, et al. · Journal of Materials Engineering and Performance · 2
Superb three-dimensional porous-structured metal foam-supported Ni/Ce/Al-CF ensemble as an active structured catalyst for hydrogen production via methanol decomposition
2025 · Lijie Fu, Yong Men, et al. · Applied Catalysis A General · 2
Comparison of Modified Arrhenius, Modified Zerilli–Armstrong, and Long Short-Term Memory Models for Predicting Hot Deformation Behavior of NiAlCrFeMo High-Entropy Alloy
2025 · Xinyu Wang, Yuanming Huo, et al. · Journal of Materials Engineering and Performance · 1
Low-cycle fatigue behavior and life prediction of rolled WE43-T5 magnesium alloy: Experiments and crystal plasticity finite element method
2025 · Anqi Jiang, Yuanming Huo, et al. · Materials Today Communications · 1
Optimization of the Hot Working Parameters and Constitutive Analysis of NiAlCrFeMo High-Entropy Alloy during Hot Forming
2024 · Wenhan Yu, Yuanming Huo, et al. · Journal of Materials Engineering and Performance · 1
The Highly Enhanced Efficiency of the Photocatalytic Reduction of CO2 over Bi2WO6 Nanosheets by NaOH Microregulation
2023 · Chao Song, Yangang Sun, et al. · Processes · 1
PDF
A multi-scale modelling by coupling cellular automata with finite element method and its application on cross-wedge rolling
2023 · Xu Ren, Yuanming Huo, et al. · Materials Today Communications · 1
Works count: 36
Citation count: 455
H-index: 12
I10-index: 12
Year
Topic
Type