Work

Abrasive waterjet (AWJ) titanium tangential turning evaluation

Year: 2014

Type: article

Abstract: The paper deals with abrasive waterjet titanium tangential turning. Titanium grade 3 with a diameter of 55 mm was used as an experimental material. Technological conditions of turning tests were the same by gradually changing value of traverse speed (vf = 1,5; 3; 4,5; 6; 7,5 mm·min-1). Experiment tests were performed by using continuous abrasive waterjet of pressure p = 400MPa, by rotation n = 60 rpm of workpiece. The abrasive particles (Barton Garnet) were fed to the waterjet in the amount of 0,4 kg·min-1. It was determined that acceleration of traverse speed did not increase the surface profile parameters.

Source: Hrčak Portal of scientific journals of Croatia (University Computing Centre)

Authors: Sergej Hloch, J. Hlaváček, Karol Vasilko, Ján Cárach, Ivan Samarđžić, Dražan Kozak, Ivo Hlavatý, Jiří Ščučka, Jiří Klich, Dagmar Klichová

Institutions: Czech Academy of Sciences, Institute of Geonics, University of Prešov, University of Osijek, VSB - Technical University of Ostrava

Language: English

Topic: Erosion and Abrasive Machining

Subfield: Mechanical Engineering

Field: Engineering

Domain: Physical Sciences

Open Access status: green

OpenAlex ID: W110583061

FWCI: 4.044

Cites: 4

Cited by: 32

Related to: 10