Synthesis and Characterization of (La[sub 0.75]Sr[sub 0.25])Cr[sub 0.5]Mn[sub 0.5]O[sub 3−δ], a Redox-Stable, Efficient Perovskite Anode for SOFCs
Year: 2004
Type: article
Abstract: Perovskite-related materials, (LSCM), have been synthesised and examined as potential anode materials for solid oxide fuel cells (SOFCs). exhibits a rhombohedral structure. It appears to be chemically compatible with yttria-stabilized zirconia (YSZ) to at least 1300°C. At 900°C, its electrical conductivity is about 38 S/cm in air and 1.5 S/cm in 5% atm). Good performance was achieved using LSCM as anode with a polarization resistance 0.9 and 0.47 Ω cm 2 in wet 5% and wet respectively. The anode polarization was further reduced to 0.6 and 0.25 Ω cm 2 in wet 5% and wet when a thin layer of (CGO) layer was coated between YSZ and LSCM anode. Stable performance was sustained for at least for 4 h operating in wet methane. By improving the electrode microstructure, the electrode polarization resistance approaches 0.2 Ω cm 2 at 900°C in 97% for LSCM containing a small amount of YSZ to improve adherence but without CGO. Very good performance is achieved for methane without using excess steam. Using ambient humidification ( i.e. , 3% the same performance is achieved with methane at 950°C as for hydrogen at 850°C. The anode is stable in both fuel and air conditions and shows stable electrode performance in methane. Thus, both redox stability and operation in low-steam hydrocarbons have been demonstrated, overcoming two of the major limitations of the current generation of nickel zirconia cermet SOFC anodes. LSCM and other complex perovskites are promising anode materials for SOFCs. © 2004 The Electrochemical Society. All rights reserved.
DOI: 10.1149/1.1639161
Authors: Shanwen Tao, John T. S. Irvine
Institution: University of St Andrews
Language: English
Subfield: Materials Chemistry
Field: Materials Science
Domain: Physical Sciences
Open Access status: bronze
OpenAlex ID: W1481570694