Topography of features machined into bisphenol A polycarbonate using closed thick film flowing filtered water immersed KrF excimer laser ablation
Year: 2010
Type: article
Abstract: Laser micromachining with the use of liquid immersion allows debris control. Use of\nan immersion technique potentially modifies the ablation mechanism when compared\nto laser material interactions in a medium of ambient air. Equipment has been\ndeveloped to allow feature machining under a controllable liquid film and thereby\nelucidate and quantify and changes in feature topography caused. The findings of this\nstudy revealed that immersion of bisphenol A polycarbonate samples in closed thick\nfilm flowing filtered water during KrF excimer laser ablation markedly altered feature\ngeometry, waviness and roughness laser machining in ambient air. Feature geometry\ndefinition improved with flow velocity. Waviness was found to be less regular and\nless predictable and roughness became fluence dependant. Variation of flow velocity\nduring immersion resulted in modification of the surface waviness: an optimum flow\nvelocity exists, producing maximum waviness. Surface roughness displayed a power\nlaw relationship with flow velocity. These observed effects are explained through\nexamination of the flow – plume interaction: closed thick film flowing filtered water\nimmersion caused a combination of photomechanical etching promoted by plume\nconfinement, laser etching and plume distortion by rapid flow velocity. Furthermore,\nthe influence each of these interactions varied depending on the flow velocity. This is\nnot an eventuality possible when using an open thin film immersed laser ablation\ntechnique: film rupture and splashing limited the plume etching contribution to the\nconfined laser ablation process. It is apparent that the changes to feature geometry,\nwaviness and roughness observed when KrF excimer laser machining under closed\nthick film flowing filtered water were brought about directly by the immersion, rather\nthan by variations in fluence level
Authors: Colin Dowding, J. Lawrence
Institution: Loughborough University
Language: English
Subfield: Industrial and Manufacturing Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W1518837385
