Year: 2004
Type: conference-paper
Abstract: This paper provides a general technical description of several types of floating platforms for wind turbines. Platform topologies are classified into multiple- or single-turbine floaters and by mooring method. Platforms using catenary mooring systems are contrasted to vertical mooring systems and the advantages and disadvantages are discussed. Specific anchor types are described in detail. A rough cost comparison is performed for two different platform architectures using a generic 5-MW wind turbine. One platform is a Dutch study of a tri-floater platform using a catenary mooring system, and the other is a mono-column tension-leg platform developed at the National Renewable Energy Laboratory. Cost estimates showed that single unit production cost is $7.1 M for the Dutch tri-floater, and $6.5 M for the NREL TLP concept. However, value engineering, multiple unit series production, and platform/turbine system optimization can lower the unit platform costs to $4.26 M and $2.88 M, respectively, with significant potential to reduce cost further with system optimization. These foundation costs are within the range necessary to bring the cost of energy down to the DOE target range of $0.05/kWh for large-scale deployment of offshore floating wind turbines.
DOI: 10.2514/6.2004-1007
Authors: Walter Musial, Sandy Butterfield, A. Boone
Institution: National Laboratory of the Rockies
Language: English
Topic: Wave and Wind Energy Systems
Subfield: Ocean Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: green
Award: G43505591
OpenAlex ID: W1522212652
