Influence of the Electrodes' Distance upon the Electrical, Optical and Structural Properties of PECV-Deposited Hydrogenated Amorphous Silicon Films for Heterojunction Solar Cell Application
Year: 2013
Type: conference-paper
Abstract: In order to fabricate highly efficient heterojunction solar cells a very thin (d<6 nm), but well passivating intrinsic a-Si:H film is needed as buffer layer between the crystalline silicon (c-Si) base and the doped a- Si:H emitter layer. In this work amorphous silicon films deposited by plasma enhanced chemical vapor deposition at low temperatures (Tdep<225°C) are investigated in terms of their electrical, optical and structural properties in dependence of the inter-electrodes’ distance by using Fourier-transform infra-red (FTIR) spectroscopy, photoconductance decay (PCD) and spectral ellipsometry (SE) measurements. Electrodes’ distance is varied from 20 mm to 120 mm. Regarding the passivation quality of the a-Si:H film an optimum electrodes’ distance of 60 mm correlated with a high Si-H bonding density is found. Moreover, the electrodes’ distance is observed to have a large influence on the initial growth rate of (i)a-Si:H films. With increasing electrodes’ distance the thickness of the fast grown layer, which forms directly after plasma ignition, decreases and therewith the overall thickness of thin intrinsic a-Si:H films.
Source: KOPS (University of Konstanz)
Institution: University of Konstanz
Language: English
Subfield: Electrical and Electronic Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W1526569754
