Year: 2004
Type: dissertation
Abstract: In the pressent work the propagation of cracks in two-dimensional decagonal and three-dimensional icosahedral model quasicrystals under mode I loading is studied by means of molecular dynamics simulations. The dependence on temperature, applied load and underlying structure has been investigated in particular. The samples are endowed with an atomically sharp crack and loaded by linear scaling of the displacement field. Subsequently the response of the system is monitored by molecular dynamics simulations. In the decagonal systems three different regimes of propagation are discernable with increasing temperature: For low temperatures the crack velocity grows monotonically with the applied load. We observe that the crack follows the path of dislocations nucleated at its tip. For temperatures above 30% of the melting temperature the crack does not remain atomically sharp but is blunting spontaneously. In the temperature range between 70% and 80% of the melting temperature the quasicrystal fails by nucleation, growth and coalescence of micro voids. This gradual, dislocation-free crack extension is caused by plastic deformation which is mediated by localized rearrangements comparable to so-called shear transformation zones. These are also observed in amorphous solids. In conclusion at low temperatures the crack propagates along crystallographic planes just like in periodic crystals, whereas a glass-like behavior is dominant at high temperatures. In the icosahedral quasicrystals brittle fracture without any crack tip plasticity is observed irrespective of the orientation of the cleavage plane and the propagation direction. The fracture surfaces are not flat but show a pronounced roughness on the atomic scale, comparable to that observed experimentally. The magnitude of the roughness depends on both the cleavage plane and the propagation direction. The clusters inherent in the structure are not strictly circumvented but are cut to some extent by the moving crack. However, a detailed analysis of the fractured samples indicates that the roughness of the fracture surfaces can be assigned to the occurrence of the clusters.
DOI: 10.18419/opus-4713
Author: Rudhart, Christoph Paul
Language: English
Subfield: Materials Chemistry
Field: Materials Science
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W1559602795
