Work

Thermophysical Properties of Thermal Energy Storage Materials - Aluminum.

Year: 1973
Type: book
Abstract: In response to RN-AFAPL-08-72-8, a program was initiated to determine the compatibility of Inconel canisters with specific thermal energy storage materials. A uniform temperature vacuum oven and and a 100-min (65 min on and 35 min off) oven control were designed and constructed. The timer-oven system generates the thermal cycle of an energy storage canister in near-earth orbit. An X-750 alloy canister was fabricated, precipitation-hardened, loaded with 215 gm of pure aluminum, and sealed off under high vacuum. It was then fitted with six thermocouples and placed in the oven for a 5000-hr test. Initial temperature measurements indicated that the aluminum alternately melted and froze during each temperature cycle. After 48 hr, only partial melting occurred. After 9 days of continuous cycling, all melting had ceased and the test was terminated. It was found that the canister had ruptured and that its contents were extremely hard. Electron microprobe analysis revealed the contents to be an aluminum-nickel-chromium-iron alloy with a density of 3.2 gm/cc (vs 2.7 gm/cc for pure aluminum). It is evident that the canister material was dissolved by the molten aluminum and that the coefficient of thermal expansion of the resulting alloy was large enough to cause the canister to rupture explosively. Preparations are under way for similar tests using eutectic mixtures of alkali fluorides. (Author).
Authors: Clare C. Leiby, Thomas G. Ryan
Language: English
Open Access status: green
OpenAlex ID: W1571608669
FWCI:
Cites:
Cited by: 14
Related to: 10