Get started
Work

Controlling diesel NOx & PM emissions using fuel components and enhanced aftertreatment techniques: developing the next generation emission control system

Year: 2012
Type: dissertation
Abstract: The following research thesis focuses on methods of controlling nitrogen oxides (NO\\(_X\\)) and particulate matter (PM) emissions emitted from a low temperature diesel exhaust. This involves studying the influence of hydrogen (H\\(_2)\\) on various aftertreatment devices such as hydrocarbon selective catalytic reduction (HC-SCR) over silver-alumina (Ag-Al\\(_2\\)O\\(_3\\)) catalysts for lean NO\\(_X\\) reduction, platinum diesel oxidation catalysts (DOC) for nitrogen dioxide (NO\\(_2)\\) production and passive regeneration methods for the diesel particulate filter (DPF). H2 was implemented on-board either through diesel exhaust gas fuel reforming or via the simulation of ammonia (NH\\(_3\\)) dissociation. Both methods showed to be very effective in enhancing the activity of a silver HC-SCR catalyst for the reduction of NO\\(_X\\) with conversions reaching 90% with the aid of an upstream DPF. A combined DOC and catalysed DPF (cDPF) configuration proved promising for passive regeneration in the presence of reformed exhaust gas recirculation (REGR). The addition of H\\(_2\\) over the DOC led to an improved catalyst light-off temperature and increased rate of oxidation for NO\\(_2\\) production. Implementing filtered EGR (FEGR) removes the hydrocarbon (HC) and soot recirculation penalty, thus minimising particulate growth which results in a significantly reduced engine-out soot emission during exhaust gas recirculation (EGR) and hence, an improved NO\\(_X\\)/soot ratio. Introducing fuel components which enhance the cetane number and oxygenate the diesel fuel allow better control of the NO\\(_X\\)/soot trade-off with improved soot oxidation properties.
Language: English
Open Access status: green
OpenAlex ID: W1593149382
Cites:
Cited by:
Related to: 10