On the Comparative Stability of Li and Na Metal Anode Interfaces in Conventional Alkyl Carbonate Electrolytes
Year: 2015
Type: article
Abstract: A comparative study of the electrode/electrolyte interface was carried out for lithium and sodium metal anodes in electrolytes consisting in 1 M LiPF 6 in EC 0.5 :DMC 0.5 (LP30) and 1 M NaPF 6 in both EC 0.5 :DMC 0.5 and EC 0.45 PC 0.45 DMC 0.1 . Symmetric Li/Li cells exhibited low polarization and smooth charge discharge curves with current densities of 0.1 and 1 mA/cm 2 . In contrast, large overpotentials were observed even at 0.1 mA/cm 2 for Na/Na cells. Such differences cannot be related to ionic conductivity of the electrolytes but are rather due to an enhanced interfacial resistance (R ct + R SEI ) as deduced from impedance measurements. The composition of the SEI layer was investigated by FTIR and found to be stable for Li electrodes but to evolve upon cycling for Na electrodes which is also in agreement with differences in surface morphology detected by SEM. A lower stability (partial solubility) of the SEI would also enable to understand the differences in the impedance of identical hard carbon (HC) electrodes in cells with either Li or Na counterelectrodes. These results cast some concerns on the reliability of the so termed half cell characterization and call for caution when interpreting the results of potential electrode materials for sodium ion batteries.
DOI: 10.1149/2.0091513jes
Language: English
Subfield: Electrical and Electronic Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: hybrid
Estimated APC paid: $1,950
Funder: Horizon 2020 Framework Programme
Awards: G4120849740, G4308403423
OpenAlex ID: W1634518569
