Experimental Characterization of a Thermopile with Aluminum-n-type Polysilicon Junctions as a Base for Multi-directional Flow Sensor Implemented in a Silicon Chip
Year: 2007
Type: article
Abstract: A multi-directional airflow sensor has been realized.The essential part of the considered sensor is a thermopile configuration, which enables the measurement of flow speed and flow direction.The thermopile is a series arrangement of eight thermocouples.A thermocouple converts a difference in temperature into an electrical signal, by means of the Seebeck effect.The thermocouples are made of aluminum-N-type polysilicon junctions.The incoming flow is heated and the degree of heat transfer by convection to the flow, depends on the speed of the flow; the faster the flow the smaller the heat transfer, which leads to a smaller (Seebeck) output voltage of the thermopiles.After signal conditioning -i.e., filtering and amplification by means of an amplification system -the electrical output signals of the thermopiles are further signal-processed by applying analog-to-digital signal conversion, so that finally the flow speed and the flow direction can be properly displayed on a computer screen.The measured values of the Seebeck coefficient or thermopower (S) were in the range of: 0.43 to 0.68 mV/K which are in good agreement with the values found in the literature: 0.5 to 0.7 mV/K.Moreover, it was found that the flow speed U is proportional to the reciprocal value of the square of the output voltage of the outgoing thermopile.
Institutions: Mulawarman University, Bandung Institute of Technology
Language: English
Subfield: Electrical and Electronic Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $150
OpenAlex ID: W1652772881
