Work

Particle aspects of precipitative softening: experimental measurement and mathematical modeling of simultaneous precipitation and flocculation

Year: 2006
Type: dissertation
Abstract: Precipitative coagulation processes (i.e., alum or iron sweep-floc coagulation and \nlime softening) are used nearly ubiquitously in the treatment of drinking water from \nsurface water sources. Although the benefits of such processes are well known, the ability \nto predict the particle size distributions from such processes is virtually non-existent. The \nobjective of this research was to improve the quantitative understanding of how particle \nsize distributions change due to simultaneous precipitation and flocculation in water \ntreatment through experimental investigation and mathematical modeling. This study \nfocused on one such process, precipitative softening, as an example system. \nThe experimental research used bench-scale calcium carbonate precipitation \nexperiments under a variety of conditions to elucidate how the particle size distribution \nchanges due to simultaneous precipitation and flocculation and to identify the controlling \nvariables. Independent variables included the saturation ratio, pH, ratio of precipitating \nions, initial seed type and concentration, and the mixing intensity. Experiments were \nperformed under conditions of constant and declining solution composition, and particle \nsize distributions were measured using a Coulter Counter. \nTrends in the experimental results were clear; particle size distributions changed \ndramatically by nucleation, particle growth and flocculation. The saturation ratio, initial \nseed type and concentration, and the mixing intensity were identified as the most \nimportant variables. Where possible, relationships linking the changes in the particle size \ndistribution with the independent variables were delineated. \nAn existing mathematical model for flocculation was modified to include \nmathematical expressions describing nucleation and particle growth. Flocculation in the \nrevised model was described using three plausible rate expressions. An underlying \nhypothesis of the research was that the incorporation of the mechanisms of precipitation \ninto the existing flocculation model would allow the prediction of particle size \ndistributions from softening processes. \nModel predictions were tested against experimental data to determine which \nrepresentation of flocculation during precipitation was most appropriate. It was found that \nat high mixing intensities flocculation during precipitation was most accurately modeled \nusing a size-independent flocculation expression. At lower mixing intensities, the shortrange \nforce model was a better predictor of the particle size distribution. The implications \nof these findings are discussed.
Language: English
Open Access status: green
OpenAlex ID: W1698452156
Cites: 106
Cited by: 5
Related to: 10