Work

Development and understanding of new membranes based on aromatic polymers and heterocycles for fuel cells

Year: 2009
Type: article
Abstract: Direct methanol fuel cells (DMFC) are appealing as a power source for portable \ndevices as they do not require recharging with an electrical outlet. However, the DMFC \ntechnology is confronted with the high crossover of methanol fuel from the anode to the \ncathode through the currently used Nafion membrane, which not only wastes the fuel but \nalso poisons the cathode platinum catalyst. With an aim to overcome the problems \nencountered with the Nafion membrane, this dissertation focuses on the design and \ndevelopment of new polymeric membrane materials for DMFC and a fundamental \nunderstanding of their structure-property-performance relationships. \nSeveral polymeric blend membranes based on acid-base interactions between an \naromatic acidic polymer such as sulfonated ploy(ether ether ketone) (SPEEK) and an \naromatic basic polymer such as heterocycle tethered poly(sulfone) (PSf) have been \nexplored. Various heterochylces like nitro-benzimidazole (NBIm), 1H-Perimidine \n(PImd), and 5-amino-benzotriazole (BTraz) have been tethered to PSf to understand the influence of pKa values and the size of the hetrocycles. The blend membranes show \nlower methanol crossover and better performance in DMFC than plain SPEEK due to an \nenhancement in proton conductivity through acid-base interactions and an insertion of the \nheterocycle side groups into the ionic clusters of SPEEK as indicated by small angle Xray \nscattering and TEM data. The SPEEK/PSf-PImd blend membrane shows the lowest \nmethanol crossover due to the larger size of the side groups, while the SPEEK/PSf-BTraz \nblend membrane shows the highest proton conductivity and maximum power density. \nTo further investigate the methanol-blocking effect of the heterocycles, N,N’-Bis- \n(1H-benzimidazol-2-yl)-isophthalamide (BBImIP) having two amino-benzimidazole \ngroups bonded to a phenyl ring has been incorporated into sulfonated polysulfone (SPSf) \nand SPEEK membranes. With two 2-amino-benzimidazole groups, which could greatly \nincrease the proton transfer sites, and three phenyl rings, which are compatible with the \naromatic polymers, the BBImIP/SPSf and BBImIP/SPEEK blend membranes show \nsuppressed methanol crossover and increased fuel cell performance in DMFC. \nNovel sulfonated copolymers based on poly(aryl ether sulfone) (SPS-DP) that \nexhibit low methanol crossover have been synthesized and explored as a methanol-barrier \ncenter layer in a multilayer membrane configuration having SPEEK as the outer layers. \nThese multilayer membranes exhibit better performance in DMFC than plain SPEEK and \nNafion 115 membranes due to suppressed methanol crossover. \nTo address the issue of incompatibility between the new hydrocarbon-based \nmembranes synthesized and the Nafion ionomer used in the catalyst layer in fabricating \nmembrane-electrode assemblies (MEAs), the MEAs have been fabricated with the \nSPEEK membranes and 10 to 30 % SPEEK ionomer in the catalyst layer. These MEAs \nexhibit better performance in DMFC compared to the MEAs fabricated with the SPEEK \nmembranes and Nafion ionomer in the catalyst layer due to lower interfacial resistance.
Author: Wen Li
Language: English
Open Access status: green
OpenAlex ID: W1823112862
FWCI:
Cites: 132
Cited by: 1
Related to: 10