The development of a slagging and fouling predictive methodology for large scale pulverised boilers fired withcoal/biomass blends
Year: 2013
Type: dissertation
Abstract: This dissertation deals with the development of a co-firing advisory tool capable of \npredicting the effects of biomass co-firing with coal on the ash deposition and thermal \nperformance of pulverised fired (pf) boilers. The developed predictive methodology integrates \na one-dimensional zone model of a pf boiler to determine the heat transfer conditions and \nmidsection temperature profile throughout the boiler, with the phase equilibrium–based ash \ndeposition mechanistic model that utilises FactSageTM thermo-chemical data. The designed \nmodel enables advanced thermal analysis of a boiler for investigating the impact of fuel \nswitching on boiler performance including the ash deposition effects. \nWith respect to the ash deposition predictive model, the improved phase equilibrium \napproach, adjusted to the pf boiler conditions was proposed that allows the assessment of the \nslagging and high temperature fouling severity caused by the deposition of the sticky ash as \nwell as low-temperature fouling due to salts condensation. An additional ash interaction \nphase equilibrium module was designed in order to estimate the interactions occurring in the \nfurnace between alumino-silicate fly ash and alkali metals originating from biomass. Based \non the developed model, the new slagging/fouling indices were defined which take into \naccount the ash burden, slag ratio in the fly ash approaching the tube banks as well as the \nslag viscosity corresponded to the conditions within the pf boiler. \nThe developed model was validated against field observations data derived from semiindustrial \npf coal-fired furnace as well as a large scale 518 MWe pf boiler fired with a blend \nof imported bituminous coals and biomass mix composed of the various quality \nbiomass/residues, such as meat and bone meal, wood pellets and biomass mix pellets \nproduced on-site: the power plant typically fired up to 20wt% coal substitution. Good \nagreement has been found for the comparison between predictions and slagging/fouling \nobservations. Based on the validated model the fuel blend optimisation was performed up to \n30wt% co-firing shares revealing highly non-additive ash behaviour of the investigated fuel \nblends.
Author: Piotr Płaza
Institution: Cardiff University
Language: English
Subfield: Fuel Technology
Field: Energy
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W1830916737
