Work

Sensing and detection of a primary radio signal in a cognitive radio environment using modulation identification technique

Year: 2012
Type: dissertation
Abstract: In today’s society, the need for the right information at the right time and the right place as well as \nincreased number of high bandwidth wireless multimedia services and the explosive proliferation of smart \nphone and tablet devices has led to increase in demand for and use of radio spectrum, which is the \nprimary enabler of wireless communications. With this increase, the principal engineering challenge in \nwireless communications domain is now on how to effectively manage the radio spectrum to ensure its \nsustainability for future emerging wireless devices, since virtually all usable radio frequencies for wireless \ncommunications have been licensed to commercial users and government agencies. \nTraditionally, the approach to radio spectrum management has been based on a fixed allocation policy, \nwhereby licenses are issued to users or operators for the usage of frequency bands. With a license, \noperators have the exclusive right to use the allocated frequency bands for assigned services on a longterm \nbasis. However, over the last ten years, this strict allocation policy has been subjected to a lot of \ncriticism because of its observed contribution to radio spectrum scarcity and underutilization. \nIn mitigating these negative effects of the current radio spectrum management policy, one of the \nsuggested measures is to open up the licensed frequency bands to unlicensed users on a non-interference \nbasis to licensed users. In this new spectrum access system, an unlicensed or secondary user can \nopportunistically operate in unused licensed spectrum bands without interfering with the licensed or \nprimary user, thereby reducing radio spectrum scarcity and at the same time increasing the efficiency of \nthe radio spectrum utilization. \nIn achieving this objective, there is a need to develop a radio engine that can sense its environment to \ndetermine the presence of primary users. Cognitive radio is seen as the enabling technology for \nopportunistic spectrum sharing. It is a radio with the capability to sense and understand its environment, \nand proactively alter its operational mode as needed to avoid interference with a primary user. To ensure \ninterference-free use to the primary user, spectrum sensing and detection has been observed as a key \nfunctionality of cognitive radio. \nHowever, there is currently no single sensing method that can reliably sense and detect all forms of \nprimary radios’ signals in a cognitive radio environment. Therefore, in order to achieve this goal, this \nthesis addresses the problem of accurate and reliable sensing and detecting of a primary radio signal in a \ncognitive radio environment. The principal research issue addressed is the possibility of sensing and \ndetecting all forms of primary radio signals in a cognitive radio environment. This objective was achieved \nby developing an adaptive cognitive radio engine that can automatically recognize different forms of \nmodulation schemes in a cognitive radio environment. \nThe thesis pictures spectrum sensing as the combination of signal detection and modulation classification, \nand uses the term Automatic Modulation Classification (AMC) to denote this combined process. The \nhypothesis behind this detection method is that, since all transmitters using the radio spectrum make use \nof one modulation scheme or another, the ability to automatically recognize modulation schemes is \nsufficient to confirm the presence of a primary user signal while the opposite confirms absence of a \nprimary user signal. \nThe research work methodology was divided into two stages. The first stage involves the development of \nan automatic modulation recognition (AMR) or AMC using an Artificial Neural Network (ANN). The \nsecond stage involves the development of the Cognitive Radio Engine (CRE), which has the developed \nAMR as its core component. The developed CRE was extensively evaluated to determine its performance. \nThe overall numerical results obtained from the developed CRE’s evaluation shows that the developed \nCRE can reliably and accurately detect all the modulation schemes considered without bias towards a \nparticular Signal-to-Noise Ratio (SNR) value, as well as any modulation scheme. The research work also \nrevealed that single spectrum sensing and detection method can only be achieved when a general feature \ncommon to all radio signals is employed in its development rather than using features that are limited to \ncertain signal types.
Language: English
Open Access status: green
OpenAlex ID: W1894572230
Cites: 134
Cited by: 2
Related to: 10