Effect of Organic Solvents on Catalyst Layer Structure in Polymer Electrolyte Membrane Fuel Cells
Year: 2008
Type: article
Abstract: The effect of an organic solvent contained in a catalyst ink on the catalyst layer structure was revealed by measuring the porosity and thickness of catalyst layers in the decal method to fabricate membrane electrode assemblies (MEAs) in polymer electrolyte membrane fuel cells. In this study, ethylene glycol and propylene glycol were used as organic solvents. The pore volume of the catalyst layer fabricated from a catalyst ink containing ethylene glycol was smaller than that containing propylene glycol near the peak pore diameter of , suggesting the intrusion of perfluorosulfonate-ionomer into the space between carbon black-supported platinum (Pt–C) particles could reduce the pore volume and extend the active reaction area of compared with . The thickness of was 1.3 times larger than that of at a fixed platinum loading, , suggesting mass transport could restrict the cell performance of compared with . The expectations from these two structural analyses were verified by measuring the cyclic voltammograms and current density vs voltage curves of a single cell for MEAs fabricated from catalyst inks containing either ethylene glycol or propylene glycol with various .
DOI: 10.1149/1.3000592
Authors: Mitsuharu Chisaka, Hirofumi Daiguji
Institution: The University of Tokyo
Language: English
Subfield: Electrical and Electronic Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: bronze
OpenAlex ID: W1982602533
