Direct Methanol Fuel Cell Performance of Disulfonated Poly(arylene ether benzonitrile) Copolymers
Year: 2004
Type: article
Abstract: This paper reports the performance of direct methanol fuel cells (DMFCs) using novel disulfonated poly(arylene ether benzonitrile) copolymers derived from hexafluoro-isopropylidene diphenol (6F), 2,6-dichlorobenzonitrile, and 3,3 ' -disulfonated -dichloro diphenyl sulfone (SDCDPS). The membrane electrode assembly (MEA) which employed the sulfonated copolymer with 35 mol % of disulfonated comonomer as the proton exchange membrane had approximately 2-fold lower methanol crossover and slightly higher (about 10%) cell resistance than the MEA using the perfluorosulfonic acid Nafion membrane, resulting in an approximately 50% improvement in selectivity, regardless of membrane thickness. Accordingly, this MEA outperformed the Nafion MEA control in a DMFC single-cell test. For example, 200 mA/cm 2 was obtained (compared with 150 mA/cm 2 for the Nafion MEA) at 0.5 V at a temperature of 80°C and ambient air pressure. Similar experiments performed with nonfluorine-containing biphenol-based sulfonated poly(arylene ether sulfone) copolymers (BPSH) indicated that the compatibility of the polymer electrolyte with the electrodes likely has a critical role in initial DMFC performance. © 2004 The Electrochemical Society. All rights reserved.
DOI: 10.1149/1.1819837
Authors: Yu Seung Kim, Michael J. Sumner, William L. Harrison, Judy S. Riffle, James E. McGrath, Bryan S. Pivovar
Institutions: Los Alamos National Laboratory, Virginia Tech
Language: English
Subfield: Electrical and Electronic Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: bronze
Award: G642202676
OpenAlex ID: W1987020537
