Microstructure and Wear-Resistant SiC Film by RF Magnetron Sputtering
Year: 2011
Type: article
Abstract: A wear-resistant SiC (silicon carbon) film on titanium substrate was prepared by magnetron sputtering technology. The film exhibits low nano-hardness of 12.1 GPa and low Young's modulus of 166.2 GPa together with superior friction/wear properties. As sliding against Si3N4 (silicon nitride) ball (2 mm in radius) at room temperature under Kokubo simulation body fluid condition, the film exhibited the friction coefficient of about 0.215 and the special wear rate in the order of magnitude of 10−5 mm3/ Nm even at the load of 500g without film cracking and interface delaminating. The high film-cracking and interface-delaminating resistance is due to the low hardness of the film and the good film/substrate modulus match caused by the low elastic modulus of the film.
Source: Materials science forum
Institution: Jiangsu University
Language: English
Subfield: Mechanics of Materials
Field: Engineering
Domain: Physical Sciences
Open Access status: hybrid
OpenAlex ID: W1995926358
