Work

Multimode intravascular RF coil for MRI‐guided interventions

Year: 2011

Type: article

Abstract: PURPOSE: To demonstrate the feasibility of using a single intravascular radiofrequency (RF) probe connected to the external magnetic resonance imaging (MRI) system via a single coaxial cable to perform active tip tracking and catheter visualization and high signal-to-noise ratio (SNR) intravascular imaging. MATERIALS AND METHODS: A multimode intravascular RF coil was constructed on a 6F balloon catheter and interfaced to a 1.5T MRI scanner via a decoupling circuit. Bench measurements of coil impedances were followed by imaging experiments in saline and phantoms. RESULTS: The multimode coil behaves as an inductively coupled transmit coil. The forward-looking capability of 6 mm was measured. A greater than 3-fold increase in SNR compared to conventional imaging using optimized external coil was demonstrated. Simultaneous active tip tracking and catheter visualization was demonstrated. CONCLUSION: It is feasible to perform 1) active tip tracking, 2) catheter visualization, and 3) high SNR imaging using a single multimode intravascular RF coil that is connected to the external system via a single coaxial cable.

Source: Journal of Magnetic Resonance Imaging

DOI: 10.1002/jmri.22506

Authors: Krishna N. Kurpad, Orhan Unal

Institution: University of Wisconsin–Madison

Language: English

Topic: Advanced MRI Techniques and Applications

Subfield: Radiology, Nuclear Medicine and Imaging

Field: Medicine

Domain: Health Sciences

SDG: Good health and well-being

Open Access status: green

Funder: National Heart, Lung, and Blood Institute