Year: 2010
Type: article
Abstract: Although starch foams are well known as biodegradable alternatives to foamed polystyrene, starch-lignin foams have not previously been reported.Lignin is an abundant byproduct of paper manufacture usually burned as fuel for lack of higher-value uses.We have prepared novel starch-kraft lignin foams with a known technique similar to compression molding.Replacing 20% of the starch with lignin has no deleterious effect on density or morphology as indicated by scanning electron microscopy: a thin outer layer of approximately 100 μm encloses a region of cellular structure containing 100-200 μm voids, with the major internal region of the foam consisting of large voids of up to 1 mm in size.Powder X-ray diffraction shows residual structure in both starch and starch-lignin foams.Differential scanning calorimetry displays endothermic transitions in the starch foam but not in the starch-lignin foam, indicating that lignin stabilizes the residual starch structure.Lignin decreases water absorption; diffusion constants for the starch and starch-lignin foams are 2.68•10 -6 and 0.80•10 -6 cm 2 /sec, respectively.The flexural strength of the starch-lignin foam is similar to that of foamed polystyrene, the strain at maximum stress is smaller, and the modulus of elasticity is larger.
Source: eXPRESS Polymer Letters
Authors: E. S. Stevens, A. Klamczynski, G. M. Glenn
Language: Western Frisian
Topic: Lignin and Wood Chemistry
Subfield: Biomedical Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: diamond
OpenAlex ID: W2028409912