Year: 2008
Type: article
Abstract: This paper reports the testing of three continuously and two simply supported concrete beams reinforced with carbon-fibre-reinforced polymer (CFRP) bars. The amount of CFRP reinforcement in beams tested was the main parameter investigated. A continuous concrete beam reinforced with steel bars was also tested for comparison purposes. The American Concrete Institute (ACI) 440·1R-06 equations are validated against the beam test results. Test results show that increasing the CFRP reinforcement ratio of the bottom layer of simply and continuously supported concrete beams is a key factor in enhancing the load capacity and controlling deflection. Continuous concrete beams reinforced with CFRP bars exhibited a remarkable wide crack over the middle support that significantly influenced their behaviour. The load capacity and deflection of CFRP simply supported concrete beams are reasonably predicted using the ACI 440·1R-06 equations. The potential capabilities of these equations for predicting the load capacity and deflection of continuous CFRP reinforced concrete beams have, however, been adversely affected by the debonding of top CFRP bars from concrete.
Authors: A. F. Ashour, M. N. Habeeb
Institutions: University of Bradford, Leeds College of Building
Language: English
Subfield: Building and Construction
Field: Engineering
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W2033186372