Crystal structure of the Escherichia coli YjiA protein suggests a GTP‐dependent regulatory function
Year: 2003
Type: article
Abstract: NTP, nucleotide triphosphate; TNP-GTP, 2′-(or 3′)-O-(trinitrophenyl)guanosine 5′-triphosphate; PCR, polymerase chain reaction; HEPES, 2-hydroxyethylpiperazineethanesulphonic acid; IMCA-CAT, Industrial Macromolecular Crystallography Collaborative Access Team; APS, Advanced Photon Source; CCD, charge-coupled device; RMSD, root mean square deviation. The YjiA gene of Escherichia coli encodes an uncharacterized protein of 36-kDa molecular weight. Its homologs are present in most bacteria and eukaryotes but not in archaea. The amino acid sequence contains several conserved consensus motifs that identify YjiA as a P-loop guanosine triphosphatase (GTPase).1 These motifs include the Walker A and B sequences involved in the binding of the phosphates of NTP and also the TKXD sequence, which provides specificity for guanine. More specifically, as a member of the G3E subfamily of the SIMIBI class1 YjiA has a third conserved glycine residue (Gly14) in the Walker A motif G11XXGXGKT18 and a conserved aspartate residue at the beginning of the Walker B β-strand (Asp92). A unique feature of YjiA among the GTPases is the presence of a glutamate residue (Glu97) in the Walker B motif instead of a more typical aspartate, and also a substitution of Asp for Glu at the end of the second β-strand (Glu39). The functional role of these substitutions is not clear, nor was the function of the protein itself. YjiA was among the genes significantly induced in response to the DNA damage caused by mitomycin C.2 Therefore, although yjiA is not an essential gene, its function seems to be important for viability of the cell. The crystal structure determination of YjiA was undertaken as part of a structural genomics effort3 to assist with the functional assignment of the protein. The YjiA protein from E. coli was cloned, expressed, and the crystal structure determined at 2.4-Å resolution. The yjiA gene was PCR amplified from E. coli MG1655 genomic DNA and subcloned into a pDONR201 plasmid using the Gateway technology (Invitrogen). For expression, the coding sequence was transferred into a pDEST14 plasmid using site-specific recombination (Invitrogen). The protein was produced in E. coli strain BL21 Star (DE3) (Invitrogen) that was transformed with pDEST14. Cells were grown on a minimal LB media containing 50 mg/l seleno-L-methionine and 100 μg/μl ampicillin at 37°C to an A600 of 0.6 and induced with 1 mM isopropyl β-D-thiogalactoside for 3 h. The protein was purified by column chromatography in two steps using Source 30Q (Pharmacia) and Butyl-560M (Toyopearl). YjiA crystals were grown by vapor diffusion in hanging drops at room temperature from 0.1 M HEPES, pH 7.5, and 1 M lithium sulfate. The crystals belong to the space group C2 with unit cell parameters: a = 83.8 Å, b = 66.5 Å, c = 56.1 Å, and β = 115.0°. There is one protein molecule in the asymmetrical unit. Crystals were frozen in the mother liquor supplemented with 1.5 M sodium formate.4 X-ray data were collected at 100 K at the IMCA-CAT beamline 17-ID at the APS (Argonne, IL) equipped with a ADSC Quantum-4 CCD detector and processed with HKL2000.5 The structure was solved by the multiwavelength anomalous diffraction method using one SeMet protein crystal. X-ray data to 2.4-Å resolution were measured at three wavelengths (Table I). Six selenium sites were located by the Shake-and-Bake method6 and were used for phasing with MLPHARE/DM.7 The atomic model was built using O8 and refined with REFMAC.9 The final model contains all 318 residues except the N-terminal methionine; 86% of the residues are in the most favored conformation. One residue, Gln277, has unusual main-chain torsion angles: ϕ = 51.9°, ψ = −120.1°. The electron density for this residue is unambiguous. The atomic coordinates of the YjiA protein were deposited in the Protein Data Bank (PDB) under accession code 1LA9. Binding of trinitrophenyl-labeled GTP (TNP-GTP) (Molecular Probes) to YjiA was measured by its fluorescence at 16°C with an excitation wavelength of 408 nm and a maximum of the emission spectrum at 540 nm using a Fluoromax-2 spectrofluorometer (Jobin Yvon). The reaction mixture contained 0–2.5 μM protein, 2 mM MgCl2, and 50 mM Tris-HCl, pH 7.5. Titration curves were obtained by adding TNP-GTP to the reaction mixture at a fixed protein concentration. In the competition experiment, GTP was added to the preincubated solution that contained 2.0 μM protein, 30 μM TNP-GTP, 2 mM MgCl2, and 50 mM Tris-HCl, pH 7.5. The YjiA protein is folded into two distinct domains with a 22-residue linker between them (Fig. 1). The N-terminal domain includes residues 1–202 and is dominated by a 9-stranded mostly parallel β-sheet. The fold is characteristic of P-loop NTP-binding proteins.10 The P-loop with the consensus sequence G11XXXXGKT18 follows the N-terminal β-strand located in the middle of the β-sheet. Ribbon presentation of the polypeptide fold of the YjiA protein. The linker between domains is shown in green. The GTP molecule was modeled by superposition on the Ras-GTP structure (PDB code 1CTQ). Residues implicated in the signal transfer between the GTP site and the C-domain are shown as ball-and-stick models. The distribution of conserved residues reveals a cluster at the NTP-binding site that includes the four canonical motifs of G-proteins,11 namely: (1) the phosphate-binding Walker A motif (P-loop), (2) the Walker B motif with the invariant residue Glu97, (3) the switch I region with the invariant residues Asn38 and Glu39 that bind the γ-phosphate of NTP, and (4) the base recognition motif T158KTD161 (usually NKXD in the G-proteins) with the invariant residues Lys159 and Asp161. The presence of the latter motif indicates the specificity of YjiA toward guanine. Specific binding of GTP by YjiA was established in a series of experiments using a nucleotide analog with the fluorescent label trinitrophenyl (TNP) attached to the ribose of GTP. Figure 2 shows titration curves observed as an increase in fluorescence upon increasing the concentration of TNP-GTP for several protein concentrations as well as for the protein-free solution. The relative protein-induced increase in fluorescence reaches 50%, which indicates the binding of TNP-GTP to the protein. Figure 3 shows the quenching of fluorescence of TNP-GTP bound to the protein upon addition of GTP. YjiA at a concentration of 2.0 μM was preincubated with 30 μM TNP-GTP in the presence of 2 mM MgCl2, and then GTP was added up to the concentration of 1 mM. The sigmoidal curve with an inflection at about 50 μM GTP indicates the replacement of TNP-GTP by GTP implying their competition for the same binding site. Effect of YjiA on the fluorescence of TNP-GTP at different protein concentrations. The reaction mixture contained 2 mM MgCl2 and 50 mM Tris-HCl, pH 7.5. Quenching of fluorescence of TNP-GTP bound to YjiA upon addition of GTP. The reaction mixture contained 2.0 μM YjiA, 30 μM TNP-GTP, 2 mM MgCl2, and 50 mM Tris-HCl, pH 7.5. The three-stranded β-meander (β3-β4-β5 at one edge of the β-sheet is an interesting topological feature of YjiA. This fragment is likely to play an important functional role due to the presence of the invariant Asp46 and the pentapeptide G63CXCC67 with four of five residues being conserved among the YjiA homologs. One possibility is the chelating of a metal ion by these residues; another is the interaction with a target protein. A combined function of binding a metal ion and presenting it to the receptor also cannot be ruled out. It is worth noting that the β-meander is directly attached to the switch I region of the protein, and therefore its conformation may be sensitive to GTP/GDP exchange. The linker between the N and C domains includes residues 203–224. It may allow the relative movement of the domains. The area of direct contact between domains is only about 600 Å2, that is, less than 10% of the accessible surface of the C domain and 6% of the N domain surface. Given the small interdomain interface and a sufficiently long linker, one can expect significant flexibility of the two-domain structure. In some species, the linker is much longer (up to 100 residues), and has a histidine-rich sequence, which may be related to Ni binding by the proteins. The sequence of the linker in the E. coli protein does not suggest such a possibility. The smaller, C-terminal domain includes residues 225–318 that form an antiparallel β-sheet flanked by two α-helices on one side. Topologically, the C domain resembles the ferredoxin fold, although it has an additional β-hairpin on one side of the β-sheet, and lacks a β-strand on the other side of the β-sheet. The ferredoxin type of α + β sandwich is common for many functionally unrelated and nonhomologous proteins, such as metallochaperones, protease propeptides, and RNA-binding domains of various enzymes.12 There are only three conserved residues, Arg257, Lys259, and Gly260, in the C domain. They are located on the surface facing the N domain, that is, inaccessible to solvent in the present structure. The buried location of the charged residues suggests two alternative hypotheses of their supposedly important role: One predicts the dissociation of the domains in the functional cycle, so that these residues become exposed and may interact with another molecule. According to the other hypothesis, these residues form a chain of communication between the two domains that also includes invariant residues Gln148 and Asp153. This idea is in agreement with the function of YjiA as a molecular switch that is typical for G-proteins. Thus, the GTP/GDP exchange and related conformational changes in the N domain may be transferred to the periphery of the molecule, namely, to the C domain. While the crystal structure suggests the molecular function of YjiA as a GTP-dependent regulator, the biologic role of the protein in the cell remains unclear. Analysis of the gene expression levels in E. coli under the conditions of genotoxic stress2 indicates that YjiA may regulate the pathway that is essential for cell viability. The cobW gene, which is orthologous to E. coli yjiA, was identified as part of the cob cluster of genes in Pseudomonas denitrificans and therefore may be somehow involved in cobalamin biosynthesis.13 However, the position of the yjiA gene in cob cluster is not conserved in other species. Given the conserved motif GCXCC in the β-meander, a metallochaperone function is a distinct possibility. It is worth noting that two other GTPases closely related to YjiA, UreG and HypB, have been implicated in the assembly of the Ni2+ centers in metalloenzymes.14, 15 But, these proteins contain histidine-rich nickel binding motif absent in YjiA. Further biochemical and biophysical studies will shed more light on the molecular and cellular functions of the YjiA protein. These studies will be facilitated by the 3D structure of YjiA presented here. Use of the Advanced Photon Source was supported by the U.S. Department of Energy, Basic Energy Sciences, Office of Science, under Contract W-31-109-Eng-38. This work was also supported in part by an award from the W.M. Keck Foundation.
DOI: 10.1002/prot.10430
Language: English
Subfield: Structural Biology
Domain: Life Sciences
Open Access status: bronze
OpenAlex ID: W2037431485
