Work

Influence of Filament and Substrate Temperatures on Structural and Optoelectronic Properties of Narrow Gap a-SiGe:H Alloys Deposited by Hot-Wire CVD: Preprint

Year: 2003
Type: article
Abstract: We have found that narrow-bandgap--1.25< Tauc Gap< 1.50 eV--amorphous silicon germanium (a-SiGe:H) alloys grown by hot-wire chemical vapor deposition (CVD) can be improved by lowering both substrate and filament temperatures. We systematically studied films deposited using a one-tungsten filament, decreasing filament temperature (Tf) from our standard temperature of 2150ý down to 1750ýC, and fixing all other deposition parameters. By decreasing Tf at the fixed substrate temperature (Ts) of 180ýC, the Ge-H bonding increases, whereas the Si-H2 bonding is eliminated. Films with higher Ge-H bonding and less Si-H2 have improved photoconductivity. For the series of films deposited using the same germane gas fraction at 35%, the energy where the optical absorption is 1x104 (E04) drops from 1.54 to 1.41 eV with decreasing Tf. This is mainly due to the combination of an increasing Ge solid fraction (x) in the film, and an improved homogeneity and compactness due to significant reduction of microvoids, which was confirmed by small-angle X-ray scattering (SAXS). We also studied a series of films grown by decreasing the Ts from our previous standard temperature of 350ýC down to 125ýC, fixing all other deposition parameters including Tf at 1800ýC. By decreasing Ts, both the total hydrogen content and the Ge-H bonding increased, but the Si-H2 bonding is not measurable in the Ts range of 180ý-300ýC. The E04 increases from 1.40 to 1.51 eV as Ts decreased from 350ý to 125ýC, mainly due to the increased total hydrogen content. At the same time, the photo-to-dark conductivity ratio increases almost three orders of magnitude over this range of Ts.
Language: English
Open Access status: green
Award: G43505591
OpenAlex ID: W2038022365
FWCI:
Cites: 1
Cited by:
Related to: 10