Year: 1991
Type: article
Abstract: Selective photo‐chemical vapor deposition (CVD) of tungsten films decomposed by direct photoexcitation of have been studied. Film deposition rate increased with increasing temperature but was only slightly dependent on gas concentration. The selectivity deteriorated with increasing deposition temperature, concentration, and deposition time. Typically, in order to achieve selectivity, the flow rate of must be lower than 35 sccm and the deposition temperature must be lower than 230°C. No encroachment and self‐limited thickness problems were found as in the low‐pressure chemical vapor deposition method. In general, tungsten films prepared by photo‐CVD were amorphous as observed by x‐ray diffraction analysis. After annealing, the tungsten had a polycrystalline structure with a resistivity of 18 μΩ‐cm.
DOI: 10.1149/1.2085861
Authors: Y. K. Fang, S. B. Hwang, C. Y. Sun
Institution: National Cheng Kung University
Language: English
Field: Materials Science
Domain: Physical Sciences
Open Access status: bronze
OpenAlex ID: W2040602937
