Work

FLASH: A rapid method for prototyping paper-based microfluidic devices

Year: 2008

Type: article

Abstract: This article describes FLASH (Fast Lithographic Activation of Sheets), a rapid method for laboratory prototyping of microfluidic devices in paper. Paper-based microfluidic devices are emerging as a new technology for applications in diagnostics for the developing world, where low cost and simplicity are essential. FLASH is based on photolithography, but requires only a UV lamp and a hotplate; no clean-room or special facilities are required (FLASH patterning can even be performed in sunlight if a UV lamp and hotplate are unavailable). The method provides channels in paper with dimensions as small as 200 microm in width and 70 microm in height; the height is defined by the thickness of the paper. Photomasks for patterning paper-based microfluidic devices can be printed using an ink-jet printer or photocopier, or drawn by hand using a waterproof black pen. FLASH provides a straightforward method for prototyping paper-based microfluidic devices in regions where the technological support for conventional photolithography is not available.

Source: Lab on a Chip

DOI: 10.1039/b811135a

Authors: Andres W. Martinez, Scott T. Phillips, Benjamin J. Wiley, Malancha Gupta, George M. Whitesides

Institution: Harvard University

Language: English

Topic: Biosensors and Analytical Detection

Subfield: Biomedical Engineering

Field: Engineering

Domain: Physical Sciences

Open Access status: green

Funders: National Institutes of Health, National Institute of Environmental Health Sciences

Award: Nano-Scale Tools for Use in Cell Biology