Highly Textured SnO2 Films for a-Si/µc-Si Tandem Solar Cells
Year: 2008
Type: article
Abstract: Fluorine doped tin oxide (SnO2: F) films have been widely used as Transparent Conductive Oxides (TCO) film for Si thin film solar cells, and recently we have developed SnO2: F TCOs with “double-texture (W-texture)” on their surface, named HU-TCO. One of the advantages of HU-TCO is high haze value thorough the whole optical region where a-Si: H and μc-Si: H solar cells are sensitive. An improvement of spectral response of μc-Si: H solar cells fabricated on HU-TCOs were shown especially in longer wavelength region. “W-texture” TCO has a combination of 300-500nm high and over 1μm wide hills those are covered with submicron-size pyramidal texture that leads to high haze value in a wide range, high transparency and low sheet resistance. In the previous works we studied how the size of large hills affected the light scattering of TCOs and spectral response of μc-Si: H cells fabricated on them. In this work we have studied the size effect of surface submicron-size pyramidal texture on the light scattering of HU-TCOs. The surface texture bigger than 100nm were useful to eliminate fluctuation of QE in a-Si: H solar cell and enhancing photo current because of the index matching between TCO and a-Si. However, the surface texture smaller than 100nm was not enough for eliminate fluctuation of QE, even though HU-TCOs have large hills over 0.8μm in width.
Source: EU PVSEC
Authors: Taneda, N., Masumo, K., Kambe, M., Oyama, T., Sato, K.
Language: English
Subfield: Electrical and Electronic Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W206872870
