Work

A Hybrid Thermopneumatic and Electrostatic Microvalve with Integrated Position Sensing

Year: 2012

Type: article

Abstract: This paper presents a low-power hybrid thermopneumatic microvalve with an electrostatic hold and integrated valve plate position sensing. This combination of actuators in a single structure enables a high throw and force actuator with low energy consumption, a combination that is difficult to otherwise achieve. The completed 7.5 mm × 10.3 mm × 1.5 mm valve has an open flow rate of 8 sccm at 600 Pa, a leak rate of 2.2 × 10−3 sccm at 115 kPa, a open-to-closed fluidic conductance ratio of nearly one million, an actuation time of 430 ms at 250 mW, and a required power of 90 mW while closed. It additionally requires no power to open, and has a built-in capacitive position sensor with a sensitivity of 9.8 fF/kPa. The paper additionally presents analytical models of the valve components, design tradeoffs, and guidelines for achieving an optimized device.

Source: Micromachines

DOI: 10.3390/mi3020379

Authors: Joseph A. Potkay, Kensall D. Wise

Institutions: United States Department of Veterans Affairs, University of Michigan, Louis Stokes Cleveland VA Medical Center

Language: English

Topic: Advanced MEMS and NEMS Technologies

Subfield: Electrical and Electronic Engineering

Field: Engineering

Domain: Physical Sciences

Open Access status: gold

Estimated APC paid: $2,534

Funder: National Science Foundation