A H2S microsensor for profiling biofilms and sediments: application in an acidic lake sediment
Year: 1998
Type: article
Abstract: We developed a microsensor for the amperometric detection of dissolved hydrogen sulfide, H,S, in sedirnents and biofilms.The mlcrosensor exhibits a fast (tgO c0.2 to 0.5 S ) and linear response to H2S over a concentration range of 1 to >l000 pm01 H2S I-', and has a low stirring dependency of the microsensor signal (c1 to 2%).We used the new mlcrosensor to obtain the first microprofiles of H2S in an acidic lake sediment with a several cm thick flocculant surface layer.Despite the low pH of 4.6, a relative low SO,'-level in the lake water, and a broad O2 respiration zone of ca 6 mm, we were able to measure H2S depth profiles in the sediment at a good resolution, that allowed for calculation of specific sulfate reduction and H2S oxidation activities.Such calculations showed highest sulfate reduction activity in the anoxic sediment down to ca 20 mm depth A comparison of calculated area1 rates of O2 consumption and sulfate reduction Indicated that sulfate reduction accounted for up to 13 % of total organic carbon mineralization in the acidic sediment.All produced H2S was reoxldized aerobically with O2 at the oxic-anoxic interface.In addition to its good performance in acidic environments, the new H2S microsensor has proven useful for sulfide measurements in neutral and moderate alkaline (pH < 9) biofilms and sediments, and thus is a true alternative to the traditionally used potentiometric Ag/Ag2S microelectrode for most applications in aquatic ecology and biogeochemistry.
Source: Aquatic Microbial Ecology
DOI: 10.3354/ame015201
Authors: M Kühl, C Steuckart, G Eickert, P Jeroschewski
Language: English
Subfield: Analytical Chemistry
Field: Chemistry
Domain: Physical Sciences
Open Access status: bronze
OpenAlex ID: W2080016098
