Morphology and melt crystallization of poly( L ‐lactide) obtained by ring opening polymerization of L ‐lactide with zinc catalyst
Year: 2006
Type: article
Abstract: The morphology and melt crystallization of zinc catalyzed poly( L ‐lactide) (PLLA) were investigated by using differential scanning calorimetry (DSC), polarized optical microscopy, and scanning electron microscopy. Isothermal melt crystallization performed at 95–135°C showed that the morphology depends on the degree of supercooling, as illustrated by crystallite perfection and lamellar thickening behaviors. Double melting peak was observed on DSC thermograms and attributed to the melt‐recrystallization mechanism, small and imperfect crystals becoming gradually more stable ones. Circumferential and hexagonal cracks were detected in PLLA spherulites, which were formed during melt‐crystallization at 135°C and quenching in liquid nitrogen. Rhythmic growth and thermal shrinkage are suggested to be the two main factors accounting for the formation of periodic cracks. Spherulite growth rates of PLLA were evaluated by using combined isothermal and nonisothermal procedures, and were analyzed by the secondary nucleation theory. The maximum growth rate reached 9.1 μm/min at 130°C. The temperature range investigated (120–155°C) belongs to the Regime II of crystallization. The value of U * was found to be 1890 cal/mol, instead of 1500 cal/mol commonly used in literature, and K g and σ were estimated to be 3.03 × 10 5 K 2 and 1.537 × 10 −4 J/m 2 , respectively. As a result, no distinct difference between PLLA catalyzed by zinc metal and those prepared with stannous octoate catalyst exists in this work. POLYM. ENG. SCI., 46:1583–1589, 2006. © 2006 Society of Plastics Engineers.
Source: Polymer Engineering and Science
DOI: 10.1002/pen.20617
Authors: Yong He, Zhongyong Fan, Jia Wei, Suming Li
Language: English
Subfield: Polymers and Plastics
Field: Materials Science
Domain: Physical Sciences
Keywords: poly(L-lactic acid), zinc catalysis, ring-opening polymerization, melt crystallization, spherulite morphology, periodic cracks, spherulite growth rate, secondary nucleation, crystallization kinetics, supercooling, lamellar thickening, double melting peak, melt recrystallization, stannous octoate catalyst
Open Access status: bronze
Funder: Nanjing University
OpenAlex ID: W2081229533
