Laminar Burning Velocities of 2,5-Dimethylfuran Compared with Ethanol and Gasoline
Year: 2010
Type: article
Abstract: The 2,5-dimethylfuran (DMF) has attracted renewed global interest since its improved production methods were published in Nature and Science in 2007. Its high energy density makes it a promising biofuel and a possible alternative to gasoline. Consequently, a series of studies, led by the University of Birmingham, aims to assess the potential of DMF as an automotive energy carrier. These studies will include an analysis of the spray properties, the laminar flame characteristics, the engine performance, and the subsequent emissions. This paper examines the laminar flame characteristics from a quiescent homogeneous air−fuel mixture. The experiments were conducted using a constant volume vessel and were recorded by high speed schlieren visualization. By measurement of the flame growth following ignition, the laminar flame speed was determined. The calculation of flame stretch yielded the Markstein lengths and the laminar burning velocities. This paper presents the results of DMF combustion for a range of equivalence ratios (0.6−2.0) and initial temperatures (50−100 °C). The flame performance when using DMF is compared to EN228 gasoline and to the most commonly used biofuel substitute for gasoline, ethanol. The data shows that ethanol has the highest laminar burning velocity, followed by gasoline, and then DMF. In the 0.9−1.1 equivalence ratio range, the laminar burning velocity of DMF was very similar to gasoline and the difference was within 10%.
Source: Energy & Fuels
DOI: 10.1021/ef100452c
Authors: Guohong Tian, Ritchie Daniel, Haiying Li, Hongming Xu, Shijing Shuai, Paul Richards
Language: English
Subfield: Fluid Flow and Transfer Processes
Field: Chemical Engineering
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W2086083662
