Piezoelectric energy harvesting from traffic-induced bridge vibrations
Year: 2013
Type: article
Abstract: This paper focuses on energy harvesting from traffic-induced vibrations in bridges. Using a pre-stressed concrete highway bridge as a case study, in situ vibration measurements are presented and analysed. From these results, a prototype of a cantilever piezoelectric harvester is designed, tested and modelled. Even though the considered bridge vibrations are characterized by small amplitude and a low frequency (i.e. below 15 Hz), it is shown that mean power of the order of 0.03 mW can be produced, with a controlled voltage between 1.8 and 3.6 V. A simple model is proposed for theoretical prediction of the delivered power in terms of traffic intensity. This model shows good agreement with the experimental results and leads to a simple but effective design rule for piezoelectric harvesters to be used on bridges.
Source: Smart Materials and Structures
Authors: Michaël Peigney, Dominique Siegert
Language: English
Subfield: Mechanical Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W2091194616
