Year: 2005
Type: article
Abstract: Particulate emission indices (per kg fuel) have been determined by sampling the advected plumes of in-use commercial aircraft at two different airports using a novel approach. Differences are observed in the number, magnitude, and composition of the particle emissions between idle and take-off. At the first airport, Electrical Low Pressure Impactor (ELPI) data indicate that number based emission indices (EI n ) vary by an order of magnitude for take-off plumes from different aircraft. Additionally, EI n values for idle plumes are greater than take-off. At the second airport, EI n values derived from condensation particle counter (CPC) measurements span ∼ an order of magnitude (3–50 × 10 15 particles per kg fuel). The median values of the idle and take-off plumes were 1.8 × 10 16 and 7.6 × 10 15 particles per kg fuel, respectively. For take-off plumes, the magnitude of the particulate emission index is not correlated with NO x at either airport. The surface properties of the particulate emissions in take-off and idle plumes differ significantly as measured by diffusion charging (DC) and photoelectric aerosol sensor (PAS) instruments. Results indicate that take-off plumes are characterized by particles with photoelectric-active surfaces, presumably elemental carbon, whereas idle plumes are composed of non-photoelectric-active constituents and coated soot particles. Measurements of the particulate size distribution (ELPI) show evidence for two modes, one at ∼ 90 nm aerodynamic diameter and a second mode at or below the instrument cutoff ( < 30 nm).
Source: Aerosol Science and Technology
Language: English
Subfield: Atmospheric Science
Field: Earth and Planetary Sciences
Domain: Physical Sciences
Open Access status: bronze
OpenAlex ID: W2094012138