IDEAL-Q, an Automated Tool for Label-free Quantitation Analysis Using an Efficient Peptide Alignment Approach and Spectral Data Validation
Year: 2009
Type: article
Abstract: In this study, we present a fully automated tool, called IDEAL-Q, for label-free quantitation analysis. It accepts raw data in the standard mzXML format as well as search results from major search engines, including Mascot, SEQUEST, and X!Tandem, as input data. To quantify as many identified peptides as possible, IDEAL-Q uses an efficient algorithm to predict the elution time of a peptide unidentified in a specific LC-MS/MS run but identified in other runs. Then, the predicted elution time is used to detect peak clusters of the assigned peptide. Detected peptide peaks are processed by statistical and computational methods and further validated by signal-to-noise ratio, charge state, and isotopic distribution criteria (SCI validation) to filter out noisy data. The performance of IDEAL-Q has been evaluated by several experiments. First, a serially diluted protein mixed with Escherichia coli lysate showed a high correlation with expected ratios and demonstrated good linearity (R2 = 0.996). Second, in a biological replicate experiment on the THP-1 cell lysate, IDEAL-Q quantified 87% (1,672 peptides) of all identified peptides, surpassing the 45.7% (909 peptides) achieved by the conventional identity-based approach, which only quantifies peptides identified in all LC-MS/MS runs. Manual validation on all 11,940 peptide ions in six replicate LC-MS/MS runs revealed that 97.8% of the peptide ions were correctly aligned, and 93.3% were correctly validated by SCI. Thus, the mean of the protein ratio, 1.00 ± 0.05, demonstrates the high accuracy of IDEAL-Q without human intervention. Finally, IDEAL-Q was applied again to the biological replicate experiment but with an additional SDS-PAGE step to show its compatibility for label-free experiments with fractionation. For flexible workflow design, IDEAL-Q supports different fractionation strategies and various normalization schemes, including multiple spiked internal standards. User-friendly interfaces are provided to facilitate convenient inspection, validation, and modification of quantitation results. In summary, IDEAL-Q is an efficient, user-friendly, and robust quantitation tool. It is available for download. In this study, we present a fully automated tool, called IDEAL-Q, for label-free quantitation analysis. It accepts raw data in the standard mzXML format as well as search results from major search engines, including Mascot, SEQUEST, and X!Tandem, as input data. To quantify as many identified peptides as possible, IDEAL-Q uses an efficient algorithm to predict the elution time of a peptide unidentified in a specific LC-MS/MS run but identified in other runs. Then, the predicted elution time is used to detect peak clusters of the assigned peptide. Detected peptide peaks are processed by statistical and computational methods and further validated by signal-to-noise ratio, charge state, and isotopic distribution criteria (SCI validation) to filter out noisy data. The performance of IDEAL-Q has been evaluated by several experiments. First, a serially diluted protein mixed with Escherichia coli lysate showed a high correlation with expected ratios and demonstrated good linearity (R2 = 0.996). Second, in a biological replicate experiment on the THP-1 cell lysate, IDEAL-Q quantified 87% (1,672 peptides) of all identified peptides, surpassing the 45.7% (909 peptides) achieved by the conventional identity-based approach, which only quantifies peptides identified in all LC-MS/MS runs. Manual validation on all 11,940 peptide ions in six replicate LC-MS/MS runs revealed that 97.8% of the peptide ions were correctly aligned, and 93.3% were correctly validated by SCI. Thus, the mean of the protein ratio, 1.00 ± 0.05, demonstrates the high accuracy of IDEAL-Q without human intervention. Finally, IDEAL-Q was applied again to the biological replicate experiment but with an additional SDS-PAGE step to show its compatibility for label-free experiments with fractionation. For flexible workflow design, IDEAL-Q supports different fractionation strategies and various normalization schemes, including multiple spiked internal standards. User-friendly interfaces are provided to facilitate convenient inspection, validation, and modification of quantitation results. In summary, IDEAL-Q is an efficient, user-friendly, and robust quantitation tool. It is available for download. Quantitative analysis of protein expression promises to provide fundamental understanding of the biological changes or biomarker discoveries in clinical applications. In recent years, various stable isotope labeling techniques, e.g. ICAT (1Gygi S.P. Rist B. Gerber S.A. Turecek F. Gelb M.H. Aebersold R. Quantitative analysis of complex protein mixtures using isotope-coded affinity tags.Nat. Biotechnol. 1999; 17: 994-999Crossref PubMed Scopus (4350) Google Scholar), enzymatic labeling using 18O/16O (2Ross P.L. Huang Y.N. Marchese J.N. Williamson B. Parker K. Hattan S. Khainovski N. Pillai S. Dey S. Daniels S. Purkayastha S. Juhasz P. Martin S. Bartlet-Jones M. F. protein quantitation in using PubMed Scopus Google labeling for with of PubMed Scopus Google Scholar), stable isotope labeling by in cell B. M. isotope labeling by in cell as a and to expression PubMed Scopus Google Scholar), and for and quantitation (2Ross P.L. Huang Y.N. Marchese J.N. Williamson B. Parker K. Hattan S. Khainovski N. Pillai S. Dey S. Daniels S. Purkayastha S. Juhasz P. Martin S. Bartlet-Jones M. F. protein quantitation in using PubMed Scopus Google M. PubMed Scopus Google Scholar), with LC-MS/MS been used for several as the of the of in isotopic labeling and the high of the of isotopic labeling to high analysis. the labeling the label-free quantitation quantifies protein expression multiple LC-MS/MS without using labeling Quantitative of in complex mixtures using and PubMed Scopus Google and quantitation of protein mixtures by enzymatic by PubMed Scopus Google S. S. P. M. of and by without isotopic labeling or spiked PubMed Scopus Google Thus, is for clinical in quantitation B. B. of and by LC-MS/MS using internal analysis of in a cell cell PubMed Scopus Google B. Quantitative of using label-free PubMed Scopus Google used to of data analysis in label-free experiments is an of the First, high in is a including the of changes in and in a in time for in different LC-MS/MS runs and the analysis. In the label-free approach, many replicate a of are a of data further data analysis and quantitation accuracy that by labeling an automated is to the of a of and provide convenient interfaces for validation of quantitation results. The of label-free for biomarker has the of a of in recent For and analysis for PubMed Scopus Google search results to quantify protein expression on for and of protein in PubMed Scopus Google analysis of the by protein Biotechnol. PubMed Scopus Google K. of label-free methods for human by PubMed Scopus Google Scholar), which uses the of assigned to a protein to the protein has demonstrated a high correlation with protein to good quantitation accuracy with the high data is of the the accuracy of peptide quantitation is for modification the accuracy of on peptide quantitation further of quantitation analysis peptide by used elution time by of ratio, charge state, and isotope a peptide validation peak to used elution time by of ratio, charge state, and isotope a peptide validation peak different LC-MS/MS runs and well with protein in complex biological Quantitative of in complex mixtures using and PubMed Scopus Google and quantitation of protein mixtures by enzymatic by PubMed Scopus Google S. S. P. M. of and by without isotopic labeling or spiked PubMed Scopus Google analysis methods on used elution time by of ratio, charge state, and isotope a peptide validation peak and methods S.A. a for PubMed Scopus Google methods Quantitative of in complex mixtures using and PubMed Scopus Google and quantitation of protein mixtures by enzymatic by PubMed Scopus Google S. S. P. M. of and by without isotopic labeling or spiked PubMed Scopus Google on the results of to and detect peptide in used elution time by of ratio, charge state, and isotope a peptide validation data. the data of is a of peptides for a peptides identified in all LC-MS/MS runs and only a of identified peptides are in a of elution time by of signal-to-noise ratio, charge state, and isotope a peptide validation signal-to-noise elution time by of signal-to-noise ratio, charge state, and isotope a peptide validation signal-to-noise elution time by of signal-to-noise ratio, charge state, and isotope a peptide validation signal-to-noise elution time by of signal-to-noise ratio, charge state, and isotope a peptide validation signal-to-noise In to identity-based methods S. S. for and biomarker using PubMed Scopus Google M. M. K. S. using peptide by and PubMed Scopus Google Aebersold R. for the and of peptide from of data by PubMed Scopus Google M. S. an analysis for PubMed Scopus Google M. M. methods for analysis of PubMed Scopus Google M. M. for and of PubMed Scopus Google M. M. M. M. P. R. M. of for the analysis of complex protein mixtures using PubMed Scopus Google Scholar), including the available M. S. an analysis for PubMed Scopus Google Scholar), M. M. methods for analysis of PubMed Scopus Google M. M. for and of PubMed Scopus Google Scholar), and M. M. M. M. P. R. M. of for the analysis of complex protein mixtures using PubMed Scopus Google Scholar), to quantify all peptide peaks in used elution time by of ratio, charge state, and isotope a peptide validation data to the of methods detect all peaks in used elution time by of ratio, charge state, and isotope a peptide validation data and the peaks different LC-MS/MS runs. in efficient and of the peaks of LC-MS/MS runs are a major To the several methods on or been a for time of LC-MS/MS PubMed Scopus Google of data by PubMed Scopus Google P. M. Aebersold R. B. for PubMed Scopus Google The applied in methods and time as the of all the LC-MS/MS runs are for a of on data or peptide The quantitation S.A. a for PubMed Scopus Google in data analysis and using an and time PubMed Scopus Google S. B. Aebersold R. M. for high PubMed Scopus Google for with PubMed Scopus Google S. B. S.A. of a label-free on peptide to the isotope affinity PubMed Google a algorithm with peptide results to peptides for The and time in data analysis and using an and time PubMed Scopus Google of with a e.g. and for quantitation analysis. S.A. a for PubMed Scopus Google and S. B. Aebersold R. M. for high PubMed Scopus Google to peaks and the peptide results as to the methods all peaks in used elution time by of ratio, charge state, and isotope a peptide validation the time as elution time by of signal-to-noise ratio, charge state, and isotope a peptide validation signal-to-noise elution time by of signal-to-noise ratio, charge state, and isotope a peptide validation signal-to-noise elution time by of signal-to-noise ratio, charge state, and isotope a peptide validation signal-to-noise To the in the approach, we present a fully automated called IDEAL-Q, for label-free quantitation including protein expression and protein modification analysis. of using IDEAL-Q uses a for identity-based of all identified peptides in a elution time It peptide by predicted elution time multiple experiments. To the quantitation IDEAL-Q validation criteria to the peptide peak clusters to filter out noisy peptide peak and of the and validation, IDEAL-Q the of as well as the quantitation accuracy with other used elution time by of ratio, charge state, and isotope a peptide validation to different IDEAL-Q supports various normalization including normalization on multiple internal to It to different fractionation strategies for elution time by of signal-to-noise ratio, charge state, and isotope a peptide validation signal-to-noise evaluated the performance of IDEAL-Q on quantitation of a standard protein quantitation using replicate cell lysate, and analysis of protein expression that an additional fractionation demonstrated that IDEAL-Q quantify to of identified in the replicate THP-1 cell by validation of the 11,940 peptide ions to identified peptides, of peptide ions were In experiment on replicate data from LC-MS/MS IDEAL-Q demonstrated its robust quantitation and its to Finally, we applied IDEAL-Q to the THP-1 replicate experiment with an additional SDS-PAGE fractionation with interfaces and convenient data for IDEAL-Q a and for label-free was from The protein was from and were from and were from was from protein and and and were from Escherichia coli was from THP-1 The cell were in with and in a were with and in The protein in cell lysate were by For of the THP-1 cell of cell lysate was by SDS-PAGE S.A. M. S.P. of cell PubMed Scopus Google The was on was with and with in for which the were with and for the were in an additional as the internal standard to this study, we used as an internal standard to of the of the were The peptides were with in for and were in of in and by LC-MS/MS from were a and by a using the The was and peptides were with a of in in for The was in with a of The was used for and the was The was with a human from the were analysis. The a and on the ions present in the data were peak using with the were using was to search the for the THP-1 cell and the for standard as the was to search with a of and a of were was as a To the of protein we the search using search and validation criteria on a by identified peptides with the The and of identified peptides are in the IDEAL-Q quantifies label-free experiments with multiple LC-MS/MS runs and different fractionation as and The of and runs are in the workflow data and of the of data from LC-MS/MS peptide and protein IDEAL-Q accepts data in the mzXML format and peptide and protein results from different Mascot, SEQUEST, and by and It criteria as a to filter out results and an elution time to the of peptides that identified peptides in the search results are used to an of the results from all LC-MS/MS runs. The identified peptide ions are to the in the are the charge state, and modification in this study, we a peptide with different charge as different The protein and peptide are in the a peptide is only identified in of the LC-MS/MS the peptide assigned to the LC-MS/MS runs in which the peptide is The to a peptide in runs is of a or the was for In the peptide is as an unidentified peptide. LC-MS/MS run identified and unidentified that the peptides quantified by IDEAL-Q were identified by in of the runs. In LC-MS/MS IDEAL-Q all peptides, identified and to quantify as many peptides as For an identified IDEAL-Q uses the identified time to detect the peak for an unidentified IDEAL-Q uses the elution time by algorithm to predict the time of the peptide in the run which the peak on the predicted peak of an unidentified peptide is called an assigned peptide. The peak clusters of identified and assigned peptides are validated by the criteria peak that validation is used to the for peptide in the IDEAL-Q the time and to the normalization are provided in IDEAL-Q and LC-MS/MS or to is a in label-free of in a peptide the time in replicate which to of an and an quantitation To quantify an unidentified its elution time to predicted from data by in The algorithm to predict the elution time of unidentified peptide. The algorithm of a validation and a For LC-MS/MS a is by only using peptides identified in runs. and the identified elution time of peptide in the LC-MS/MS The is as = and a = The which the correlation of the peptide elution time in LC-MS/MS is used to the elution time of an unidentified peptide in run the elution time of the peptide identified in the other in the elution time predicted by the from the elution time a to the of we a that the elution time of the peptide identified in is by the elution and predicted elution with all in the of as in is the of in the the identified elution of a peptide in a LC-MS/MS the algorithm as the predicted elution time of the unidentified peptide in a specific an unidentified peptide has multiple LC-MS/MS runs in label-free is unidentified in the run but identified in several other IDEAL-Q uses the of all by different runs to the of the elution time as = = the of the as the the the the the assigned For a peptide in the that the peptide is identified in LC-MS/MS elution time and unidentified in a specific LC-MS/MS run we for run run of and to the predicted elution time of the peptide by a specific peptide in an LC-MS/MS the elution time by for an unidentified peptide or from the search results for an identified and IDEAL-Q the used elution time by of ratio, charge state, and isotope a peptide validation data the of the elution time and the ± that the of the elution time for different peak is on the used elution time by of ratio, charge state, and isotope a peptide validation data which the peak which isotopic validated by the for the criteria used for peptide signal-to-noise ratio, charge state, and isotope criteria are of a is elution time by of signal-to-noise ratio, charge state, and isotope a peptide validation signal-to-noise elution time by of signal-to-noise ratio, charge state, and isotope a peptide validation signal-to-noise The the the has a The charge is used to peak clusters that an charge by the peaks is to Finally, the isotope the correlation the isotopic distribution of the peak and the isotopic distribution of isotope in for a Scopus Google of the peptide. The correlation is evaluated by the of peptide that this is of the of peptides with For peptide in an LC-MS/MS run that validation, we the of the peak by the the and elution time of the the and elution time are by peak Then, we the algorithm to for The the is used to the peptide in the LC-MS/MS called the peptide run that a peptide validation is as from the LC-MS/MS In this the peptide run is as in the normalization and peptide all peptide run in the LC-MS/MS we to IDEAL-Q supports normalization strategies in an LC-MS/MS the of spiked internal standard used to and multiple spiked internal the of all peptide run in the LC-MS/MS the mean of all peptide run in the LC-MS/MS and a normalization In to peptide run on different experiment IDEAL-Q the of peptide peptide in the peptide and peptide in the peptide of fractionation as and been to the of a LC-MS/MS analysis. a is the peptide is from the peptide For experiments with multiple and is used to multiple LC-MS/MS peptide is as the of the peptide run of the LC-MS/MS runs in the Then, the peptide in all the are to the peptide peptide the peptide of the protein ratio, IDEAL-Q supports the to the peptide ratios of and normalization J.N. for with and label-free PubMed Scopus Google Scholar), which used to further For protein IDEAL-Q the to by only the peptides of the protein or by all It is that the of was on the search results. It an to further the peptide ratios of a protein by using for of of and ratios the Scopus Google The protein of to is by a of the peptide ratios the of peptide is by the peptide experiments to the performance of IDEAL-Q in of the accuracy of elution time quantitation the of quantified in all identified and quantitation In the the workflow and the quantitation performance of IDEAL-Q were demonstrated on a serially diluted standard protein spiked coli cell The quantitation and accuracy on the were demonstrated on the biological of THP-1 cell In this we validated all the quantified peptide ions in a data for of the quantitation To the of robust peptide elution time for and peptide quantitation for we a data from the biological replicate experiment of THP-1 cell lysate using different LC-MS/MS In the data different LC-MS/MS runs. For quantitation of a an additional fractionation as is to the of label-free quantitation experiments from and in fractionation a peptide or a protein in or peptide in only the peptide expression and to peptide To the quantitation IDEAL-Q is to with label-free quantitation experiments using different fractionation The quantitation accuracy is demonstrated by a biological replicate of the THP-1 cell lysate with an additional SDS-PAGE fractionation by the The quantitation results are in the in quantitation IDEAL-Q For data IDEAL-Q is to search results from major search and data in the mzXML which from data by different the search results and mzXML an the identified peptides and in all LC-MS/MS runs is For peptide and validation in LC-MS/MS we all peptides in the and as identified or To quantify an identified a peptide by the search in an LC-MS/MS the elution time and of the identified are to the data of the peptide that processed by to quantify an unidentified we detect the peptide peaks by using the algorithm to predict the elution time of the peptide for peptide Then, we the predicted elution time and to LC-MS/MS data for the peptide peak this is called peptide The peptide peak the assigned is processed by validation an identified peptide or an assigned peptide validation, its peak is used to the to peptide is as For peptide we the of the peak by the the and elution time of the peak and using the Then, the peptide is by the To IDEAL-Q supports and LC-MS/MS to peptide in LC-MS/MS Then, the peptide is For protein the protein is by the of to protein IDEAL-Q further normalization on the peptide It the to further peptide ratios of a protein by using To the performance of IDEAL-Q, different of standard and were spiked coli cell lysate and by of was identified by and quantified by The protein ratios of coli that were a mean of ± as in The ratios of the other spiked were with the expected with as in the protein ratios for serially diluted and were with the expected ratios and demonstrated good linearity (R2 = as in results that IDEAL-Q protein expression ratios with high accuracy and results of with different of identified of quantified in a high quantitation in of the of quantified in all identified is a in label-free a peptide is quantified only identified in all LC-MS/MS runs. we the of IDEAL-Q to the quantitation by of identified peptides in all LC-MS/MS runs. To the performance of IDEAL-Q on a complex we an experiment on biological of the THP-1 cell lysate and LC-MS/MS analysis. of peptides to was identified The elution of LC-MS/MS runs from the a high for in is a high correlation the runs of the In the data peptides were identified in of the six LC-MS/MS runs in the biological peptides, and peptides were identified in and LC-MS/MS runs for biological The peptide peptide to the of peptides identified in LC-MS/MS runs of biological replicate and LC-MS/MS runs of the other as the of peptides in we = = = and = identity-based quantitation methods only quantify peptides that are identified in all LC-MS/MS for quantify peptides in the peptide which only for of all identified In IDEAL-Q to quantify all identified peptides, peptides identified in LC-MS/MS by peptide using the predicted elution we on the quantitation strategies of the conventional identity-based and IDEAL-Q, we used IDEAL-Q to quantify the peptide to its performance in of the quantitation and quantitation In this we the quantitation is by different peptide by the and the accuracy on the of of protein The quantitation accuracy was further by this in the The conventional identity-based quantified peptides in only peptides to 45.7% of all identified peptides and of all identified were IDEAL-Q quantified by peptide peptides to of all identified peptides and of all identified were The protein and peptide quantitation for different peptide are in The results show that peptide a in the quantitation we using peptide to the quantitation the quantitation The of the protein ratios for the peptide are in The of the protein ratios in the peptide is which is to in In as in the protein in of the peptide are all to to in with standard of The of the of data revealed that the quantitation the quantitation validated all the quantitation results to the performance of The quantitation of a validated peptide is the are The peptide peak has the as the assigned peptide The peptide peak or peptides and The ratios by IDEAL-Q and are 11,940 peptide ions by IDEAL-Q in all six LC-MS/MS runs from the biological peptide ions peptides) were identified by the For peptide we only to (2Ross P.L. Huang Y.N. Marchese J.N. Williamson B. Parker K. Hattan S. Khainovski N. Pillai S. Dey S. Daniels S. Purkayastha S. Juhasz P. Martin S. Bartlet-Jones M. F. protein quantitation in using PubMed Scopus Google for validation, and as high as of were correctly quantified by IDEAL-Q, as in the unidentified peptide which were assigned by IDEAL-Q, were and correctly were and were correctly aligned, but validated as in validation, the accuracy for all the peptide ions was the of the data of In the validation results revealed that peptide ions which was of peptide validation and out of The results that the high accuracy achieved by IDEAL-Q to peptide and the validation used to filter out noisy data. Thus, fully automated quantitation without In to the demonstrated quantitation and IDEAL-Q a elution time for that robust quantitation of data with elution Thus, we a biological replicate experiment on the THP-1 cell with LC-MS/MS analysis on different to the elution time results of with of other the and the the the elution time of an unidentified peptide was by the elution time of the peptide identified in the other LC-MS/MS In the the elution time was predicted by used identified peptides from the LC-MS/MS run of to the of = and = in the from the elution of the achieved the of by for the The results that IDEAL-Q is of robust quantitation with which are in we used the data of the to with the other methods on a by M. and of statistical R. Google Scholar), which is used for performance in used a data of all identified peptides in of six LC-MS/MS runs to a and of of from peptides were identified in of the six LC-MS/MS runs. In a the data is of of the is used as the and the are used as the data to for the elution time of peptides in the In the is used to the performance as in by in as the the of a is the accuracy of the The of all using the methods are in the accuracy of the algorithm different was that of the and the performance of was good on which has the data in all the data and data are in The results show that the performance of is stable in experiments. its were on different with of elution time by by in a To further the quantitation accuracy achieved by different elution time the data was quantified on the elution time predicted by the and validation criteria were applied to filter out noisy data. The quantitation performance in of quantitation and quantitation accuracy are in The quantitation accuracy is by the mean and of the peptide and protein The accuracy of elution time the quantitation accuracy and quantitation as by the results in The performance was the elution time predicted by the which the quantitation accuracy as well as the quantitation the mean of the protein on the from validation) to was on the data on the In summary, the results show that validation filter out noisy in noisy data to quantitation of validation on and validation quantitation quantitation in a validation, the and the results in of the mean and of protein using the elution time of achieved protein quantitation the with To the performance of IDEAL-Q on quantitation with a fractionation we quantitation for the THP-1 cell lysate with an additional SDS-PAGE fractionation was and to by LC-MS/MS analysis. the search by in the with of the of SDS-PAGE many to or For as in the identified peptide to the protein was only identified in of biological IDEAL-Q identified the peptide in of biological by peptide in to that in The conventional only quantifies the peptide that is identified in of the biological and the peptide by peptide in SDS-PAGE that in SDS-PAGE is = In IDEAL-Q and quantifies all peptides unidentified in other the peptide in all IDEAL-Q the peptide as = which the by the conventional the identified peptides to peptides to were quantified data for further The mean and of the protein ratios is ± the quantitation compatibility of IDEAL-Q on a label-free with a fractionation quantitation analysis a of input efficient data analysis is The is the peak In to uses the identified elution time to predict the elution time of unidentified peptides for peptide It the and the time In the the input mzXML were and IDEAL-Q and to quantify the data on a with a and It is that IDEAL-Q on a with the on the experiment design, IDEAL-Q flexible quantitation including for various normalization and fractionation IDEAL-Q supports and normalization J.N. for with and label-free PubMed Scopus Google IDEAL-Q a for validation, and quantitation as by the in protein and peptide with the ratios and all of quantified peptide and other statistical It the or of peptide To to data from quantitation several including and are by In this study, we present a data analysis called IDEAL-Q, for label-free It is with different search and To the to peptide we the to predict the and to detect unidentified peptides in all LC-MS/MS runs for peptide of elution time quantitation is that achieved by the conventional identity-based validation on peptide peak clusters filter out peaks or noisy data to high quantitation demonstrated the quantitation performance of IDEAL-Q on a standard protein and a by a replicate experiment on the THP-1 cell and validated results to further the performance of
Source: Molecular & Cellular Proteomics
Authors: Chih-Chiang Tsou, Chia-Feng Tsai, Ying-Hao Tsui, Putty-Reddy Sudhir, Yi-Ting Wang, Yu-Ju Chen, Jeou-Yuan Chen, Ting-Yi Sung, Wen-Lian Hsu
Language: English
Subfield: Spectroscopy
Field: Chemistry
Domain: Physical Sciences
Open Access status: hybrid
Estimated APC paid: $3,430
OpenAlex ID: W2101053476
