Development of a comprehensive model for RIE-lag-based three-dimensional microchannel fabrication
Year: 2007
Type: article
Abstract: This paper presents an etch technique capable of three-dimensional (3D) design control for microfluidic channels via reactive ion etching (RIE) lag effects. Predictable results are achieved by the development of a complex Langmuir model relating the exposed surface geometry to the depth and width of microfabricated channels that result after isotropic etching of silicon. The model captures the increase in isotropic etch rate as the amount of the exposed surface area increases. The technique is based on the most complex surface pattern to date, composed of five independent geometric variables. Data from over 350 different patterns and four different etch times were collected to examine the influence of each parameter on the result. This technique provides the capability for vast networks of microcapillary channels and large, low aspect ratio cavities to be created on the same wafer requiring a single SF 6 etch step. Designs utilizing this technique can be realized with 10% accuracy to the models; the main source of inaccuracy arises from wafer-to-wafer process differences. Several microfluidic devices were fabricated, proving the possibility of accurate design, and providing insight into structures achievable from 3D control of microfluidic structures.
Authors: K Gantz, L Renaghan, M Agah
Institution: Virginia Tech
Language: English
Subfield: Biomedical Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: bronze
OpenAlex ID: W2127669796