Dynamic Analysis of a Resonance Based Micro Air Vehicle Structure
Year: 2014
Type: dissertation
Abstract: A unmanned air vehicle (UAV) is an aerial platform controlled autonomously or by remote control by a pilot.With actuators, sensors and computers becoming smaller the interest for developing an even smaller UAV that could for example be used indoors resulted in a micro air vehicle (MAV).In the previous work on the MAV within the Atlanta project at the Delft University of Technology a design was found by Bolsman [1].The advantage of this design is that the wing sweeping motion is decelerated by storing potential energy in a mechanism that can be reused resulting in a harmonic sweeping motion.Similar to the thorax of flying insects a compliant structure allows to reduce of the amount of energy needed for the wing sweeping motion of a MAV by exploiting resonances.This will increase the stroke angle of the wing sweeping motion and can provide a higher lift production.Soon an idea was found for a compliant structure that includes energy storage by making use of torsion deformation instead of bending deformation in the design of Bolsman.The advantage is that the wings can be attached to the compliant structure directly.This will reduce the amount of components increasing the minimization of the whole MAV.For a harmonic load the response of the structure becomes periodic and approaches a triangular wave response when the nonlinearity becomes more dominant.In previous research it was found that this motion is most efficient in generating lift force and therefor nonlinearities can not be neglected.Having large angles of twist, longitudinal stresses induced by the axial shortening can cause significant hardening behavior.When looking at forced vibration response curves for a system associated with nonlinear restoring forces they become asymmetric and "leans" towards higher frequencies in case of hardening behavior.This means that when increasing the amplitude the resonance frequency increases.Furthermore, for some values of the excitation frequency, many different amplitudes of oscillation are possible.A closed form solution is found capable to account for the non-linear effects of warping and elongation of the longitudinal fibers due to torsion.During the derivation an approximation is used for the torsion constant including warping effect.With the equation of motion of a bar model, time and frequency responses are obtained to give more insight in the nonlinear dynamic behavior of the structure.The nonlinearity of the structure is maximized by the use Dynamic Analysis of a Resonance Based Micro Air Vehicle Structure viii
Author: M. Nugteren
Institution: Delft University of Technology
Language: English
Subfield: Aerospace Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: green
Funder: Technische Universiteit Delft
OpenAlex ID: W2140997087
